Quickest, best way to clean engine cooling fins

Wyld Bill

Been Around the Block
Doing a resto and wondering the best, quickest method to clean aluminum fins on a engine head. I have some stuff called Nu-Brite and Renuze that we use at work for cleaning aluminum HVAC coils. It makes them nice and bright clean (acidic). Would that work or should I just use simple green and elbow grease?
 
I used a pipe cleaner and sprayed an excessive amount of all purpose cleaner on it, let it sit for a few minutes. But I painted them afterwards, if you're trying to shine them up use an attachment on a rotary tool of some kind, they make great polishers for a dremel or drill
 
I'd avoid anything acidic. Get a nylon brush with long bristles and go to town. But bottom line is old engines are old engines :)

If you want it to look new, the only real solution is to take it apart, bead blast it (or vapor blast if you want the most awesome finish out there) and then either leave bare aluminum or paint and reassemble with fresh gaskets, seals and new bolts.
 
I've been tempted to power wash mine as there re places I just cant get to and no matter what I keep discovering more dirt. I haven't tried it as I think it might not be the best idea. So I've been using a variety of brushes and drill attachments. It works OK for the most part.
 
That's a question I've been asking lately, myself. I'm just going to the local u-spray and hitting the (removed) cylinders with the soda blaster.
 
Gnarshead - I tried power washing fins before......and it didn't work for me. Granted, my power washer is electric, not gas so it might not be strong enough. Either way though, the baked on stuff that hides behind fins is tough to get to.

Vapor blasting looks phenomenal though. Especially if you plan on polishing the aluminum - it practically does the job for you.
 
Google Vapor Blasting - DO THE TON shows up in the first page of results :) We talk about it a lot I guess, but nobody I know has had it done yet. Maybe I'll send my next engine to the US to do it, but shipping both ways will cost more than the blasting.
 
But what we do have in Canada is Dry Ice blasting, appropriately enough. I'm going to call them tomorrow and see about blasting engine cases.

www.wickensdryiceblasting.com
 
I have had lots of luck using Westley's Bleech-Wite (blue/red print on white spray bottle). It's used mainly for tires and white walls...but I've used it for engine cleaning with no problem! Safe on paint (even used it on classic airshow aircraft cowlings). Just wet it down, spray it, let it soak a few seconds then hit it with a brush. Repeat as required, and hit with soapy water. Then rinse. Works great!
 
Honestly I kind of like a little bit of dirt and grime. I always wonder if perfectly turned out bikes actually ever get ridden and I'm not going to agonize over a smudge so my rule of thumb is to just get the bike to a respectable level of cleanliness and leave it at that.
 
Quickest and best way will be to drop them off at a guy who does vapor blasting. Not the cheapest by any means, but if I were going for a resto (especially on a bike that's worth a bit) then it would be vapor blasting all the way.

IMG_20120830_134132.jpg
 
I soda blast all my stuff and if you don't want to get a full blast setup you can make a cheapie one that will work well enough to do just the jugs.
 
OK! So I've seen on Amazon this kind of stuff. Its advertised as a "Sand blasting gun" for about $22 US. Do you think it would be worth it? This, a box of baking soda and some time night be all it takes. Any thoughts guys?
 

Attachments

  • Sand Blast gun.jpg
    Sand Blast gun.jpg
    9.6 KB · Views: 16,246
That kind of thing would probably work assuming you have a compressor that will support it, but it will not be ideal, and grocery store baking soda really doesnt work all that well, you need actual blast media

But before i had a nice compressor and a dedicated soda blaster, I have done a few sets of carbs with just a box of baking soda, a clear tube, and an air gun.
 
I thought as much. Might be worth my wile to save my pennies and invest in one of these. Its still cheap but looks a bit more purposeful.

http://www.harborfreight.com/air-tools/air-tool-accessories/portable-abrasive-blaster-kit-37025.html

For that authentic at the beach experience, during the impending winter, you could lay under a hot light bulb and let friends take turns blasting you with it.
 
gnarshread said:
OK! So I've seen on Amazon this kind of stuff. Its advertised as a "Sand blasting gun" for about $22 US. Do you think it would be worth it? This, a box of baking soda and some time night be all it takes. Any thoughts guys?

That's what I've got.

SONICJK said:
That kind of thing would probably work assuming you have a compressor that will support it, but it will not be ideal, and grocery store baking soda really doesnt work all that well, you need actual blast media

I use it with grocery store baking soda too as I don't know where to get proper blast media and the no name brand stuff from the supermarket is dirt cheap $3 per kg.

Might not get the best results but I'm pretty happy with it:

B26DC2E6-CC6E-40CF-87D0-E9FDF5AFF4A4-1868-000000FEA7C4AB04.jpg
 
Thanks Neevo! I might just have to get hooked up. I'm not after spotless and on a budget as tight as a ducks a*# so this seems perfect.
 
gnarshread said:
Thanks Neevo! I might just have to get hooked up. I'm not after spotless and on a budget as tight as a ducks a*# so this seems perfect.

I didn't get great results straight away using it as intended as it simply wouldn't suck enough media through at high enough velocity. Now I sit in the garden on a stony patch (so the BS doesn't kill any plants) and shoot the part manually dipping the tube that comes out the bottom into the soda tin. Find it picks up waaaay more soda and blasts really well.
 
neevo said:
That's what I've got.

I use it with grocery store baking soda too as I don't know where to get proper blast media and the no name brand stuff from the supermarket is dirt cheap $3 per kg.

Might not get the best results but I'm pretty happy with it:

B26DC2E6-CC6E-40CF-87D0-E9FDF5AFF4A4-1868-000000FEA7C4AB04.jpg

The store bought stuff is just not as course as the blast media, it does work just fine it just takes longer and more soda.
Look for an armex distributor in OZ, the blast media is actually cheaper for me at a little under a dollar a pound.
 
Back
Top Bottom