Rd200 shocks on a cl350?

[Tj_saxon]

Anyone willing to measure some rd200 shocks so I can see if they will work or have any advice as to why they wouldn't? If they won't I'm probably just gonna get some tec or some from common motors. Thanks in advance.

 

[Barnburner]

Do yourself a favor and just buy the new aftermarket shocks. While the RD200 and CL350 aren't too far apart in terms of weight, the quality of any used RD200 shocks would most likely be poor. I don't have any experience with the Tec shocks but I do have a pair of the same progressive rate shocks sold by Common Motors (they're technically EMGO brand) on my CL350. They're decent but I would eventually like to get something nicer like Hagons or a nice vintage set of Works, Fox, or Koni.

 

[VonYinzer]

Everything about using those shocks on a cb350 is a bad idea. Buy new shocks.

 

[sav0r]

Modern technology > old technology.

 

[Tj_saxon]

Thanks so much guys, I guess I'm gonna give the tec shocks a shot.

The rd200 shocks where new emgo shocks, all I did was search 12.5" eye to clevis shocks and they popped up. Again thanks for the heads up.