RFY reservoir performance shocks 13.5" eye-clevis

[focusinprogress]

Ran these on my CB550 cafe racer for two seasons and really impressed with them for the money. The bottom clevis was drilled to fit the larger diameter Honda bolt, and I just used a stainless through-bolt instead of re-tapping threads into the clevis on these. Also filed the upper bushings to fit over the posts on the CB frame.

Long story short, these are now direct bolt-on for honda CB's and are 13.5" in length between mounts. These were/are about $120-150 new on ebay depending on supplier....

I'm asking $80 plus shipping for them.

 

[lipuid]

are they height adjustable? How many inches?

 

[focusinprogress]

they are adjustable for preload, and the bottom mount seems to have SOME threaded adjustment there but most likely won't adjust more than an extra half inch as they sell these in lengths that are 1 inch increments.

 

[jungalist]

I want to buy the same, but in black, but may i ask you a favour? can you mesure the diameter of the spring?

I want to know for sure they can't interfere with my exhausts as they appear larger than my stock shocks.

 

[chewy]

^^ same. Diameter matters to my CL350 exhaust...
and any guess as to the spring rate?

 

[jungalist]

did a little research...

dimentions should be:

Eye Diameter: 10mm or 12mm
Eye thickness : 21mm
Spring thickness: 7mm
Working Stroke: 68mm
Spring Width: 50mm (2")

conclusion: same spring width as stock for me so i just ordered mine!

 

[focusinprogress]

bump

 

[jaythornton000]

Still available?