SPEED BLEEDER Reference charts - HONDA

[locOleoN]

Hey all. I found this to be an extremely valuable reference from the guys at SOHC 4:
http://www.sohc4.us/forums/index.php?topic=14157.0

Here is the site to oeder them from:
http://www.speedbleeder.com/

Speedbleeder Reference by Honda Bleeder Part Number and Model

45109-300-003 ====> Speedbleeder SB10125 or SB10125SS (stainless steel)
CB750K '76 750 Four K
CB450K3 - K7 Super Sport 450
CB750K0, CB750K1, CB750K2 Four
CB750K3 - K5 Four

45224-579-013 ====> Speedbleeder SB7100 or SB7100SS (stainless steel)
CB450K3 - KK7 Super Sport 450
CB550K, CB550K1
CB360T, T '76
CB550F '76
CB550F '77
CB750F '75 - '76 (front)
CB750A '76
CB750A '77 - '78
CB550K '77 - '78
CB750K '77 - '78
CB350G, CL350K5 Super Sport 350/Scrambler 350
CB350F, CB350F1
CB500, CB500K1, CB500K2 500 Four
CB360, CB360G
CB500T, '76
CB400F '76 - '77 Super Sport 400 Four

43352-568-003 ====> Speedbleeder SB8125 or SB8125SS (stainless steel)
CB750F '75 - '76 (rear)
CB750F '77 - '78 (front & rear)
CB400T '80 - '81 Hawk

45224-413-003 ====> Need Size for 650K!
CB400TI, CB400TII '78 - '79 Hawk I/II
CB400T '80 - '81 Hawk
CB400A '78 Hawk Hondamatic
CB750K '79 - '82, CB750L '79
CB650 '79
CB650 '80 - '82, CB650C '80 - '81
CB450SC '82 - '83, '85 - '86
CB450T Hawk
CB650SC '82 Nighthawk 650

 

[pyro139]

thx see they aint got 650 sized yet, i seem to have no choice but going have disemble one caliber and reset piston so i can remove bleeder screw and check size.

 

[CanadaDan]

thx see they aint got 650 sized yet, i seem to have no choice but going have disemble one caliber and reset piston so i can remove bleeder screw and check size.

I'd contact them first... GREAT people do deal with... they may have the size already or coming...worth an e-mail.

Of all four sets I've ordered NONE of them have been on the charts... I just e-mailed and they figured it out.

 

[pyro139]

I'd contact them first... GREAT people do deal with... they may have the size already or coming...worth an e-mail.

Of all four sets I've ordered NONE of them have been on the charts... I just e-mailed and they figured it out.

but if read the thread on sohc4 speed bleeder them self haven't got the 650 measurements yet

 

[CanadaDan]

but if read the thread on sohc4 speed bleeder them self haven't got the 650 measurements yet

Kudos to the guys at SOHC but they may have missed something... I'd still call the MFG...

 

[Canuck Plumber]

Got a dead link here.