WTT: Lots of misc. bits for cb750's and others

Deviant1

Over 1,000 Posts
Hey y'all. I'm trying to build my bike as cheaply as is possible, and I've got LOTs of parts to trade. So if you've got something interesting and you need some of the bits I have, let me know. I'll post pictures of specific parts on request. So I'm building a 72 cb750, what I'm interested in getting right now is rearsets, a decent gas tank off of any 70's 80's era bike, braided brake lines, some smaller headlight ears, a taillight I can mount under my tail, and anything else ya think I might be able to use.
Here's what I have.
1) a stock set of fork tubes and bottoms for a cb750 sohc
2) a set of tree's for a 70's cb350
3) a pair of sidecovers for a 73 tx500 with badges
4) a headlight bezel with light and trim ring for a 73 tx500
5) Two chrome velocity stacks that'll fit my 750, I'll get the size later, but these are the good, heavy chrome stacks
6) two aluminum velocity stacks with the screen over the tops, these are the same size as the other pair
7) One aluminum velocity stack that could be polished, it's a straight tube with no flare, same size as others
8.) 77 and later idiot light bezel for cb750 sohc
9) Master cylinder and front brake controll for a cb750 sohc
10) several rear brake pedals for a cb750 sohc
11) a tach and speedo for an early cb750 sohc
12) a brake caliper and bracket for a 70's cb350 (locked up)
13) two small black and silver honda tank badges (not sure what model, just the honda logo)
14) Lots of front fenders from unknown bikes, some cb750, some tx500, etc.
15) headlight from a Harley chopper about 6 inches with a visor, chrome is bad, but would look good painted
16) several front disks for Honda sohc cb750
17) one 70's era sidecover badge for a cb750 sohc, it's the gold one that says cb750 FOUR
18) I've got several front wheels for a honda sohc 750 with discs... no rear wheels, sorry
19) I've got a cb350 twin motor with carbs and a cb750 sohc motor and a cb750 Hondamatic motor, plus various spare parts for both motors, so if you need a part from one of these motors let me know.
I'm located in Gulf Shores, Al so the items will have to be shipped.
This is just the stuff from the top of my head, so ask me if there is something specific you need for a cb750 or cb350
Thanks,
Alex
 
Are you running your rear fender? I have a 70's era HD tail light that I used to run on my CB750. Fits onto the mounting holes for the fender (if you run without). Looks pretty cool...
 
I'm looking to do a dual disc setup. What do you have that I could use? Anything else you might need?
 
I've got spare disks, but I've only got two calipers for my 750 and they're going towards my own dual setup... I've got a cb350 caliper and bracket that's probably locked up... Currently I need a set of brake lines for my 72 cb750... Or a nasty fuel tank for me to dent up. Also a small taillight, no taller than 1 1/2 inches
 
I have a good 70's CB750 tank. I'm looking for a painted front fender I can adapt to my KZ650 build and a single coil dual lead for my CB200T.
 
Back
Top Bottom