freedomgli
Been Around the Block
Re: della corsa CB350
The SL350KO brace appears to be a frame brace to take side stand loads. No side stand anymore therefore brace not needed I suppose.
Did some more work to fit the rear hoop section. Cutting, grinding, shaping, etc. It's getting closer. I did some more trimming to the fiberglass solo seat so it kicks up a little at the rear. Need to fill in turn signal holes then shape hoop a little bit more before I tack it in place and verify final fitment. Once I'm satisfied then I'll weld it for real.
Also today I scored a good deal on a used Ohlins steering damper. Now I can start figuring how I'm going to mount it. Hoping to do a top mount or front mount. There's not much room between the tank and the head tube so I might have to build something off the front fairing probe I'm fabricating.
The SL350KO brace appears to be a frame brace to take side stand loads. No side stand anymore therefore brace not needed I suppose.
Did some more work to fit the rear hoop section. Cutting, grinding, shaping, etc. It's getting closer. I did some more trimming to the fiberglass solo seat so it kicks up a little at the rear. Need to fill in turn signal holes then shape hoop a little bit more before I tack it in place and verify final fitment. Once I'm satisfied then I'll weld it for real.
Also today I scored a good deal on a used Ohlins steering damper. Now I can start figuring how I'm going to mount it. Hoping to do a top mount or front mount. There's not much room between the tank and the head tube so I might have to build something off the front fairing probe I'm fabricating.