Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
You can fit mirrors direct to bars and fit a plug so it will look more 'race professional' (check out GP bikes, they mostly have a some bar rather than long plugs, less chance of damage if it falls over)
CrazyPJ Do you know what the engine bolts to frame should be torqued at? I really don't know what else to really check on this bike front end. Figured I would at least check the torque.
Does. It vibrate if you just sit there and hold the rpm up high?
You can pound a solid steel bar into the handle bar or fill it with lead shot to reduce the vibration . . if the vibration is horrible this will not fix bit .
If the engine bolt but takes a 14 mm or 9/16 wrench then you can torque it to 28 ft lbs . . you can. Torque the axle not to 60.
Thanks for the torque picture. I will also check to see if the vibration happens at a stand still with high RPM's tomorrow. Thats a great question, I haven't checked that.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.