gt750.....
- Thread starter trips750
- Start date
rockcitycafe
I make things.
doing any engine work? there was a group making around 150hp with these bikes
kadavenport
Been Around the Block
HECK YA, I'm gonna love seeing this build. How did you get 3 750s? Lucky.
well i think i got 4 out of the whole deal, i was bidding on just a motor on ebay that ended up going for over 250 so i got out of that auction, then a day later i found a lot of 3 on ebay buy it now for around 350, so we drove 8 hours to get them, and the guy threw in a heap of a fourth just to get rid of it
sharperdill
Been Around the Block
That trip was great and the burritos were awesome.
This is a really cool build! Thanks for sharing this with us! 8) 8)
I have the same running gear on my Kawi H2 Triple! I can hardly wait to see how it works on my machine and how you make it work on yours! 8) 8)
Here's the FZ600 running gear mocked up on the H2 frame.
I think it's a great plan to hang on to the other GT engines! You should take one and build it into a MONSTER!!
I've got a "spare" H2 engine too!
Any hoo, keep postin'! ;D
I have the same running gear on my Kawi H2 Triple! I can hardly wait to see how it works on my machine and how you make it work on yours! 8) 8)
Here's the FZ600 running gear mocked up on the H2 frame.
I think it's a great plan to hang on to the other GT engines! You should take one and build it into a MONSTER!!
I've got a "spare" H2 engine too!
Any hoo, keep postin'! ;D
more progress today, it goes in spurts, due to time and money...and direction
worked on the "rear sets" we concidered some aftermarket bolt ons for a minute, but we used the location of the passanger peg mounts which fits me perfect, its a small bike with a long tank so the rider sits back further, added some holes to shave weight, but i think we added some in the end, but it still looks good
I spent a couple hours in the behemoth and got one rim blasted
chad likes gussets
worked on the "rear sets" we concidered some aftermarket bolt ons for a minute, but we used the location of the passanger peg mounts which fits me perfect, its a small bike with a long tank so the rider sits back further, added some holes to shave weight, but i think we added some in the end, but it still looks good
I spent a couple hours in the behemoth and got one rim blasted
chad likes gussets
sharperdill
Been Around the Block
Drewski said:This is a really cool build! Thanks for sharing this with us! 8) 8)
I have the same running gear on my Kawi H2 Triple! I can hardly wait to see how it works on my machine and how you make it work on yours! 8) 8)
Here's the FZ600 running gear mocked up on the H2 frame.
I think it's a great plan to hang on to the other GT engines! You should take one and build it into a MONSTER!!
I've got a "spare" H2 engine too!
Any hoo, keep postin'! ;D
Just out of curiosity what tire set-up are you running on your H2? (Make and model of the tire and size.)
A little more progress, the rims got completely blasted, and one painted, i used Duplicolor high-temp ceramic spray paint, with a little wet sanding they should come out pretty nice i hope
Here is Chads work on the oil tank
plug
and here is his two piece fiberglass mold looks great
and the start on the tail section
Here is Chads work on the oil tank
plug
and here is his two piece fiberglass mold looks great
and the start on the tail section
sharperdill
Been Around the Block
trips750 said:core for the tank
That tank is going to be sweet.
