Recent content by BEAM

I completely disassembled the head. The side bearings look fine but there is a groove cut in the middle, is that normal?? Also I took a pic looking in the crank case thru the cam chain hole. Is that little piece at the top broken?? As stated above, I am going to have the camshaft and rockers...

I'm not tied to antigravity, just haven't really looked around yet. I need the battery to be as small as possible to run my applications. Nice call on teh R/R, will make sure it is Li-ON designed Definitely getting the m-button Coils: what about Dyna? Are they just expensive for no...

Hi, I am rebuilding a CB360, currently on the engine so I haven't moved onto the electrical side of things yet. I want to use an m-unit and an antigravity battery and had kind of decided not to use an electrical starter. However, now I MAY be waffling on that. I wanted to know how that may...

http://www.dotheton.com/forum/index.php?topic=43545.msg473565#msg473565 That the thread?

I haven't taken the arms out yet, I will do that tonight and post pics. I'll look into the crazypj posts, seems to be a lot of mods you can do on these engines?

Hello, I am doing my first engine rebuild (20K current miles). I bought the bike several years ago as a non-runner, cleaned the carbs and it fired right up. Drove it down my street and it backfired some (previous owner worked on the timing, so that may have been the culprit). Anyway...

very nice. what about the wire itself?

Where is the best place to buy wire, connectors, coils, and everything else to make a wiring harness for a cb360 with no electric starter?

So if someone wanted to start with new wire. Where would be the best place to buy thsi wire and have a bunch of diff colors? I'm sure somebody has a website I could go to!

Also, when I get to the tach and speedometer i'll be ordering some decals from you. Those things are pretty awesome.

That looks way easier than the one in the manual. Thanks!

Oh yeah, I plan on getting a small 4 cell ballistic battery or somnething very small as I won't be running too much. Any ideas on that as well?

Has anyone done one of these that they'd like to share? I have a bike that the wiring is all screwed up and may need to start from scratch and run it completely bare bones.

What did you do with your old CB360 tanks? That dark green one was nice.

I have a cb360 with discs and I'm having such a hard time with te hfront brake caliper I may switch to a drum assembly. It's a small bike and I'm no racer so would this be a good thing to do? I bought a Nissan front brake master cylinder brake level that i think has teh micro switch on it you...