Wiring Diagram for a CB360 with only kick start

[BEAM]

Has anyone done one of these that they'd like to share? I have a bike that the wiring is all screwed up and may need to start from scratch and run it completely bare bones.

 

[BEAM]

Oh yeah, I plan on getting a small 4 cell ballistic battery or somnething very small as I won't be running too much. Any ideas on that as well?

 

[Sonreir]

I have one... one sec...

 

[Sonreir]

I "borrowed" this one from oldmanhonda.com and made some modifications in order to remove the starter and horn circuits. It should get you 99% of the way there.

 

[rock2d2]

I look at every wiring diagram I see floating around (sort of mentally preparing to redo my own wiring) and this is by far the best diagram I have seen.

 

[BEAM]

That looks way easier than the one in the manual. Thanks!

 

[BEAM]

Also, when I get to the tach and speedometer i'll be ordering some decals from you. Those things are pretty awesome.

 

[Sonreir]

Thanks, man.

 

[BEAM]

So if someone wanted to start with new wire. Where would be the best place to buy thsi wire and have a bunch of diff colors? I'm sure somebody has a website I could go to!

 

[Swapmeet Louie]

every bike is wired the same! only diff is whether it's points or CDI.

 

[raptormeat]

shouldn't the fuse come before the red/white wire splits off to the rectifier?

 

[mydlyfkryzis]

shouldn't the fuse come before the red/white wire splits off to the rectifier?

The fuse location in the that schematic is the stock fuse location. Most bikes are like that...