Recent content by bitsq

Updated pics: I'm still having issues with the transmission only going from neutral to 3rd gear. Oil has been flushed and changed. Clutch has been adjusted. I'm going to try and take off the side cover this week and check out the shift drum cog. I'm really hoping I don't have to pull the...

So I kind of got frustrated with the neutral switch and gave up on it for now. I have been working away on other areas of the bike. I finished up most of my wiring and tucked everything away as neatly as possible under the tank and seat area. I just bought a new regulator/rectifier off of...

yeah, the voltage is fine. it just looks like whatever is inside the case isn't pushing the switch far enough to engage the light?

So I finally started working on my bike again Here is the current issue: I'm trying to wire up a neutral indicator light but am having some issues with it. I have checked all of the wiring and narrowed down the issue to the switch. I pulled the switch out of the block and connected the light...

Yep. Both cylinders are firing and nothing is dragging. I'm going to mess around with it tomorrow and see if I can figure it out

Thanks for the tip.. I'll try that and see if it makes a difference What boggles my mind is that if I get the bike started in neutral then clutch in and push the shifter down it does go into gear no problem. But it engages 2nd or 3rd?? While moving, trying to shift either up or down does...

Yep. That ball bearing is installed. I distinctly remember dropping that ball while I was cleaning the clutch linkage and spending about 20 min trying to find it. Haha I just had the mufflers temporary mounted up, I wanted to hear what they sounded like :) Thanks for the input. Hopefully...

i just had it running when i first got it, i wasn't able to ride it The valve cover/side covers were removed, but the case never cracked filled it with fresh oil - not rottella (generic 10w40 oil used for first start-up, will be changed again shortly) yes, the clutch linkage was adjusted as...

Finally went for my first ride! It is extremely difficult to find neutral and the bike isn't switching into first gear. It felt like the bike was in either 2nd or 3rd gear... any ideas?

Summer's over. Back to the built Figured out all of the wiring and finished a battery tray for under the seat today Hopefully it will be rideable by next weekend :)

The bike looks absolutely amazing. I'm really digging the extremely clean custom wiring. I'm at the final stages of my build and I'm debating going the custom route. This is definitely inspiration for me. Amazing work

Thanks! Ferrari Red (Code 332) I was going to go with the ducati base red but decided i liked the Ferrari red alot better

thats a good idea, thanks!

It was the damn key!!! Silly issue solved. Thanks for the advise, really appreciated More progress. Tank has been repaired and primed. Time for paint