Recent content by cookymonster

hi i have a 1979 cb750kz and want to replace my clutch and front brake levers ( including the master cylinder ) im after some thing less bulky for the brake any one know of anything i can replace them with ? andrew

are any more decals and patch's available ? if so how much cooky

yeah ive seen that to but cant remember where too :-\

Yeah rory im in the uk , not sure how much shipping would cost lol

my rear wheel has a drum brake not disc im really not fussed on the comstars i like the retro/classic look id give lacing a go , i hate paying people to do things when you can possibly do it yourself ;D

i have a 1979 cb750kz with comstars and would like to swap them for wire spoked wheels what wheels are my best options for this swap :-\ i dont mind a bit modifying to make things fit :P i would also like to drop the front wheel size down from 19" to a 18" would this be ok ? cheers cooky ;)

only got these ones , will take some more up to date ones soon just got to paint the tank and wheels and few little bits to sort out then im done ;D

Hi guys I got a cb750kz thats almost finished Im from caerphilly south wales just outside cardiff Andrew

Cheers crazypj I have the original switch will see how its wired up , I dont mind if off is on and on is off as long as it works. Cooky ;)

No not stock switch , from a aprilia milie , wires are yellow/red - starter , blue/grey - kill , 2 green/red wires - ground . Cheers cooky

yh should be straight swap , maybe you have pull out other wires or something when unpluging original indicators :-\

hi all i have made a bare bones wiring loom for my 79 cb750 kz but when i try to wire in the kill switch i keep blowing my fuse ??? i was told to wire it to the black wire on ignition but i keep blowing fuses . any ideas where im going wrong ? cheers guys cooky

cheers guys 8)

ok the gauge is the thickness then ? cooky ;)

iv got quite a bit of 16amp wire , will this be any good :-\ cooky