Recent content by danker16

Looking for a welder for my kz440 project. Anyone up for the job? Suggestions? Sent from my SM-G935W8 using DO THE TON mobile app

You still around? Sent from my SM-G935W8 using DO THE TON mobile app

Dont mess with that just yet, clean them, inspect the needles for damage and get new gaskets and try to start it up then. I usually clean the float seat and passage as far as i can with q tips

Whats the reason why you are picking at the carbs

They are 7/8and the mirror is a 8mm hole at thr top. You can just plug it Sent from my SGH-I747M using Tapatalk

thats the left hand controls, i dont have mine assembled right now

http://scootertuning.ca/en/styling-parts/13073-switch-unit-stage6-cnc-type-black.html you can get the blinker unit separately. ill get some photos in a bit

http://scootertuning.ca/en/styling-parts/13067-throttle-kit-stage6-cnc-type-black.html I wanted to achieve the same as you and I went with this set they are very compact. the throttle side I mounted it upside down so the start button is operated with my thumb instead of the index finger and...

I used the VHT roll bar and Chassis epoxy paint, its very though!! apply it over a clean and bare metal frame! loves bare metal

daytona drag bars i think. i really like the euro classic style handle bars

what he said and look it up there are tons of guides on how to do it

show us your old pistons!

the no anodizing on the head..the black stuff on your head is baked on gasket material.. wear gloves, i used scotch brite pad, a razor blade and lots of brake cleaner

brake cleaner and scotch brite

any interest for these here