Recent content by shredducus

When you key is on. I have voltage at both the yellow and blue wire coming off the points. Points are new and I've taken some sandpaper and cleaned them. I also took the caps off of the plug wires and trimmed the plug wires down to expose the wire inside and grounded that to the frame. Still...

Ok, first let me start this off with, I've been searching for 2 days now for an answer specific to my question, with no avail. Here is the question. 72 cb 500 has no spark at the plug. Things I have done so far Fully charged battery No killswitch Wiring is good. 12 Volts going to coils 4-5...

Finally got to my pistons because I thought I blew out my rings. Well I guess I was right because the left rings came apart in about 20 pieces. But with further inspection, it looks like my piston is chip. If anyone could please take a look at the picture enclose and give me some insight, I...

Thanks for the warm welcome Wow, Ive been stuck on that all night and just got it loose it five minutes thanks to your help. thank you sir, sure saved me a headache

Hey guys got a question for ya Im trying to rebuild this cb200 motor. Everything is going great thanks to the manual, but ran into a little problem with the camshaft. I having a problem trying to loose it to get the cam out to get the head off. I loosened the tensioner, but my manual says to...