Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Soo its been a while.... I have pretty much got nothing done.
a small update: Got my new stator in from electrosports (great company), installed it, got her running and road her home to store/work on. As it turns out I needed to replace the whole charging system, so I also ordered a new rotor...
Hey guys, I'm in the process of rebuilding my rear brakes on my cb750 and I'm in desperate need of a rear brake rod joint, part #: 46504-371-000. I could only find one online retailer who had it on their site available to buy and after purchasing it, I received an email stating that they...
So I finally pulled the stator to reverse the polarity of the brushes and the stator is completely black on some coils. It looks like severe burn. I'm guessing the coils were grounding to the case? does that sound like a possible problem?
I'll be sending the stator back to electrosport in the...
So I was putzing around google and I'm starting to think its an intermittent electrical problem. From the sputtering to my headlight not working, to the fuse blowing, this has to be the problem. There are only a couple places I think this could be happing. 1. I think I may have reversed the...
Got the fuse at autozone, when home put it on and the bike started. The bike was running really bad (worst than normal) and kept loading up and bogging down. Then after about five mins it shut off and the fuse was blown.
Anyone have any ideas as in where to start, what to test, or even what the...
This is my favorite bike that I've come across on this site. Just looks like a bad ass mofo. I was $1500 away from walking out the door with a GT750, wish I would of waited.
Welp, I searched high and lowes (bum dum tis) at Radio Shack, Home Depot, and Lowes and I could not find a 30amp fuse or a fuse holder. I'm getting sick of ordering little inexpensive parts off the internet, so it looks like this projects on hold until I get back from Topsail Island (not like I...
yeah it is.
I'm thinking that it has to be something with the way the brushes are wired up, even though it looks right according to the picture. Everything else I've done was plug and play so I don't really see how that could of been messed up. I'll recheck everything I've done tomorrow. I went...
Emailed electrosport and they told me to send it back and they'll send me a new one, awesome.
He stated though that the coating is more just a cement to hold the wires in place and the bike should still work. Can anyone think of a reason that I'd be getting some smoking at the 30amp fuse near...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.