Recent content by Woodsy11

Thanks Pj I have valve guide seals on order. Waiting for them to arrive. I will go at the valves with a wire wheel. Thanks for the advice.

Valves too?

Also, sorry for the sideways pictures. I turned my camera down to the lowest quality and they still turn sideways. What is the best way to go about cleaning the pistons and valves?

Got the head off today, in order to switch the valve springs around. Got a good look at the top of the pistons and the bottom of the valves. There is definitely a fair bit of carbon on both! What does everyone think?

Hey all I am having a really hard time sourcing a new headlight assembly. I am looking for either a 5 3/4 or 7" headlight assembly with a 35/35w bulb. I have been searching for a while now and can't seem to find anything. Dime city has a whack of headlights but they all seem to be 55/65w bulbs...

Wow Thanks for the info deviant. I'm definitely going to do the job.

Alright. Ill get on the job of turning them around. Thanks for the heads up guys.

Crap. What effect will that have on the engine?

I know I have seen that discussion floating around somewhere but, how can you tell they are upside down?

For real? The PO must have done this because it was like that when I opened it up. Guess Ill have to go out and get a valve spring compression tool and etc.

Screw you broken bolts!!! Pun intended.

Saturdays Thanks for the moral boost. Honestly, I needed it. Sorry to hear you have had your struggles as well, but I am glad to know I am not the only one. I did further research on this topic and found a few potential solutions, one being the Easy out that mobius suggested. Thanks again for...

Hey all Well I managed to have my first major setback today. I overtightened the bolts on the bracket that holds the cam chain tensioner in place. Both bolt heads sheared right off. Not sure how I managed to be such a moron but, I guess it happens. I am hoping they can be salvaged by drilling...

Which headlight system did you put on there?

Got the engine painted finally. I am taking all the covers off in order to place the stock bolts with stainless allen head bolts. Also, I decided to check out the cam chain tensioner to see if it is in decent shape. Boy am I glad I took a look. It is about 2 seconds away from shattering into the...