Search results

Hi, im looking for measurements on the collars listed number 12 and 14 here: http://www.cmsnl.com/yamaha-dt250d-1977_model8611/partslist/E-04.html#results The wheel came without these and im gonna fabricate new ones. Anyone? =)

Hi, ive read around some forums and seen some pictures that XL 250 forks with front wheel is a direct swap to an xs650 without fabrication? Anyone can confirm this? Also, did Honda use the same forks for XL 250 1972-73 (motorsport) and in the 1974-76 model? Front wheel aswell? 8)

So, whats the torque on the two allen bolts on each fork leg? is it an M8 or M10 thread? Help would be appreciated. /Best Tobias

So, im having trouble bleeding the 11mm MC with stock caliper on an SR500 -1980.. it locks the wheel maybe halfway, but i can still turn the lever against the bar easy?! natural? its from an ktm 450 exc -2003. And also wondering if that 11mm MC is enough for the 4piston brembo i got laying...

So here's a link to the diagram: https://drive.google.com/file/d/0B0BD_MkiU7JpcVczY2M1aURyZHM/edit my question now is, can i run it with a regular OFF/ON switch with two connection points? and how do i do that? im new into wiring but got everything figured out except the ignition switch.. and i...

Where I am right now, but not sure about the difference on tire sizes on rear comparing to front :P looks a bit dumb in my eyes. but what other options do you have for a 1.85 18" front tire? i think the heidenau 110/80 18" requires a 2,5" rim? /Tobbe

Ive heated the steering bearing bottom race in the oven, the surface of the race turned blue?! Should i be worried? i could clean the blueish of with some paper after it was fitted on the steering stem, may it be damaged? i were not over 180c but it smelled alot in the kitchen but could it have...

Im interested in putting a tkc80 on my front wheel, bad thing is that their are none rated as "front", im running a 18inch (1,85) rim. bike = SR500 -1980 spoke wheels. should i go with the size 3,50 for front? and yes mount it backwards. these are the available sizes for 18 inch rim 3.25 - 18...

anyone know any tank looking like this one? and same size? im after a new tank for my sr 500 =) i know this one i hand built and u can buy it (for alot of money) but im trying a cheaper way. im up for minor mods, but would be alot easier if it was wide at the tunnel from the start...