Search results

Working my way through my project and I'm at the stage where I'm trimming all my wires to length and crimping terminals on etc. This is a full rewire using aftermarket lights and switches. My headlight has 3 wires, ground, low beam and high beam. When lights are off and I hit the flasher...

Right. I have a custom frame, using a hydraulic rear caliper. No foot pegs mounted yet. I don't have any vertical parts of the frame to mount a rear brake master cylinder to, I have one centralised tube that is the backbone of the frame, and inset too far for me to mount the cylinder...

My aftermarket speedo has idiot lights built in. They all share one earth and are switched on with the live supply. My neutral switch is closed/no current passes through when in neutral. And it's open current passes through when out of neutral. How the hell do I get the poxy idiot light...

I'm running 4 led turn signals. I've bought a 2 pin led flasher relay, Installed it and it's not working right. When I'm not using turn signals lights are off. When i use left or right turn signal the corresponding signals dimly light up and flashes brighter. It doesn't go off and on...

Im in the process of trial fitting the ultima plus wiring to my frame and switches etc. Im building a custom chop and most parts have been bought off ebay so are not specific to a particular model of bike. The engine is a kawasaki z650. Handlebar switch is an all in one off Ebay. The...

As the title says really. I'm after some inspiration and to see how creative some of these bobber/ chops rear tails can get. ;D

I have a set of Suzuki gsxr 1000 k2 upside down forks with their original triple clamps. They are going on a hardtail z650. Does anyone know someone, or has done something similar before, where they have fitted spoked wheels from any other bike? Single disc or dual I don't care. Any Info...

Right I want to run Suzuki gsxr1000 k2 upside down forks on my kawasaki z650. I have the Suzi forks and triple clamps. I've removed the kawasaki ones from the bike and tried to install the Suzy ones and I've hit a problem. I can use the z650 bearings on the suzi clamps and that works...