Search results

Hey guys, just picked up a '72 (twin) cb350 and she's missing a few things. I figure the air box should be pretty easy to come by with everyone throwing pods on theirs. I'm up in Canada (Edmonton) - would prefer within Canada due to shipping but don't really care.. Let me know what you've got//...

Hey guys, I've got a 78 cb400t. Looking to do a carb sync using a homemade manometer, I've seen guys drill a hole in an m5 allen bolt or use a main jet, if it's the right thread pattern. What do you guys suggest? (My bike already has a spot for the adapters in the cylinder head, tapped M5)...

I've got a couple things acting funky with my 78 cb400t. I've removed the airbox, replaced with UNI pods. Removed the factory installed exhaust crossover and attached two slip on mufflers. When I rebuilt the carbs I mixed up the main and secondary jets. They are literally IDENTICAL in size so...

When you turn your ignition switch to on does your headlight come on as well as all four of your flashers? (not blinking.. Just on) I'm thinking they did and then they went off when I started the bike. Is this correct? Ive got a 78 cb400t1 and im just finishing up the wiring. It's been so...

Want to buy a headlight bucket - has to be a 7 inch diameter. The Sh**ier the better as I'd prefer something cheap, I'm gonna hack it up and paint it anyways! ;D Devon 8)

Lookin for any help I can get for this part of the project! I'd like a total DIY build and this is one area that's got me nervous.. So any websites you guys can point me to would be greatly appreciated! Devon

Has anyone used this stuff? What did you think? Did it have quite a bit of sparkle or pretty subtle?? http://www.duplicolor.com/products/metalSpecks/ It's what I'd like to use as from what I've seen the only other way to get flake on is using a compressor/paint gun -- which I dont have :/ Devon

1) throttle tubes And 2) there's a gear type thingy inside the front wheel on my cb400t - wow that sounds stupid but I literally have no idea what it's called! Can post a pic if needed? Thanks! Devon 8)

Not taking any credit for this one guys - Found it on a site that... found it on another site. All you carb experts - if you could, please chime in here and give us a thumbs up or tell me these people have no idea what they're talking about and I should take this down. Motorcycle Carburetor...

Hey guys so just got a set of tapered stem bearings for my 78 cb400t and a few things aren't making sense. First off, this business doesn't seem to separate, do I need to cut it off? Didn't wanna wreck something by forcing it. If it doesn't come off then this is how it sits: Which just...

Just noticed Tim's been registered on here since feb 2, 2007. Does that make today the fifth birthday of the site?? If so, congratulations! What an amazing community you guys have built. Devon 8)

Hey guys, just wondering if any of you can recommend a shop for mufflers? I'm going for a real vintage look and like the bell or sometimes called trumpet end mufflers but can't seem to find a good deal on em. my go to shop DCC has em but at a 100$ a pop :o Thanks, Devon

Hey guys, I've been browsing through here getting inspired (and confused) about cafe seats for a while now. I see a lot of guys using their stock "seat pan" for their seat build. Is this necessary? As I understand it, this offers easy attachment and stock "removability" I'd like to do this...

Hey guys, been looking for a battery for like... wayyy to long now. I'd like something smaller to tuck under the seat but just can't find the right one. The bikes a CB400t Kick only(from the factory 8) ), led signals, led tail lights and led indicator lights, stock headlight. So far, ive...

They won't flash they just light up solid I know Im missing something cuz I've read about it but for the life of me I can't find it!! I know I could just wire in resistors but that would negate the benefits of led signal lights - what is it that I need to wire inline to make these suckers...

It starts up no problem but when as soon as I drop it on gear it lunges forward and stalls. I've also notices there's not much spring in the clutch cable. Any ideas???!!! Thanks, Devon

Hey guys, I've got a 78 CB400T. I've noticed that the bikes handlebars have a bit of shakiness to them when driving at higher speeds. I only notice this If I let off them. They wiggle a bit but the bike keeps driving straight, this is at 100+km/hr in fifth gear, at 80km/hr in fifth gear...

Hey guys, just picked up my first bike a 1978 CB400T :) Very excited, its running from the PO and everything seems to be functioning fairly well except for two things. 1) The bike just won't seem to go into neutral. I basically have to shut her off and get down there and fiddle with it until i...