Search results

You can go to my website at silverbullit.net to see the builds. Bullit

If you need any help I have built three KZ650's this summer. I built one Cafe racer out of a 1978 KZ650DSR and a Street Fighter out of a 1977 KZ650. I also did a resto mode on a 1981 KZ750.

Check E-Bay there were a few Bennelli tanks yesterday. silverbullit.net

Kawasaki KZ-650 Superbike by Silver Bullit Cafes of Spokane Washington This 1977 KZ is the tail end of the 4 cylinder muscle bikes of the 70s. Fresh paint and upholstery, New Tires, New Wheel Bearings and Seals Front and Rear, New Headlight and Front Turn Signals, New Wiring Harness, New LED...

What year and model. Also what size. I have rebuilt three KZ's this summer. Did you tighten the two ten MM bolts in the cam valley?? Also did you put red lock tight on your cam tensioner gear on the top of the head between the cams.

Thanks guys, I am still working on her. Going to get some gold pin striping done on it soon.

First thing you need to do, is take the spark plugs out and put some PBA Blaster in it or any penetrating fluid. Let it sit for a couple days and put it in second gear and try to bump it loose. Also take off the left side cover where your stator or alternator is and see if it is froze to the...

Well I have about finished my project. Powder Coated wheels and frame. New jets and filters, New bearings in front and rear wheel, new tires. Kerker 4into 1 and a Moto GP 8" muffler. And so on and so on. She rides real nice for a 34 yeard ole girl.

Well there are two things that usually can go wrong. carbs and jetting, and electrical. Since you have already done the carb and replaced a coil. I would check your fuses first, loose wires, and I assume that you have electronic ignition and no points?? Have you checked your timing? If you...

Need some advice. Just rebuilt by fronta brake calipers and master cylinder. I bled the brakes according to manual but front brake lever is still spongey. I have the dual front brake system. I am looking for suggestions. I am going to try am bleed them again tonight. Alot of work for no...

1984 Pontiac Trans Am 91,335, 5.0, T5 5 Speed, Hotchkis Suspension, Tokico Gas Shocks, Torque Thrust 2 rims, Continental ZR1 tires. My Auto Cross ride

Rear view, what most people see.

And another pic.

Started my Cafe Project on March 1st, just finished. Old School technology but it is fun. I hope to start another build next week. Gotta find another project bike.

Just finished my Cafe Project. Since I usually build harley's this was a learning curve. It is a real hoot to ride. I have about 100 hours labor in her.