Search results

I bought an oil filter relocation kit and I want it to look like the polished and clear coated engine side covers.They are already pretty smooth.I think some 320,600,1000,1500 and clear coat them will work.What clear coat should I use directly on aluminum,2K?

http://www.instructables.com/id/DIY-spray-paint-1/ This looks interesting for us DIY cats roaming around here.

I bought a V Star back in spring.I am getting ready to put new tires on it.Since the bike is nearly all black,I had considered using that chrome coating that makes the chrome have a blackish tint to it.Has anyone tried this stuff and any tips for applying it...

This weekend a member from GStwin forum (Dgyver) and myself restarted building an engine he lost steam on.He gathered the parts a few years ago and did some of the machine work.All that was left was assembling,test,and tune.This is easier said than done tho.The first thing that was done was to...

After all the mods I have done to my bike,my chain rubs the tire in a right hand curve,when the suspension cycles.I really don't want to replace an expensive rear tire.I'd like to add a bolt on chain tensioner.Unfortunately there isn't enough room for a skate wheel.My idea is to use a small 13...

I saw a naked sport bike today.The frame was painted a darker silver,but not quite charcoal color.It had a few coats of clear and looked spectacular.I was hoping to do something like this with rattle cans.I have become quite good(not great) with the old marble can.Anyone have any ideas what...

I have a few small parts that the chrome is rusting and flaking.IS there away to remove it without using a grinder?I'm thinking there is some gnarly chemicals that will work.Anybody know?

I have a line on a Suzuki GS450E that needs some lovin.Good resto project, if my info is correct.It's in western NC.The guy is only looking for people that are serious about restoring it.Factory Canadian add ons come with it.PM me for info.

I bought a VFR slave cylinder to do a hydraulic clutch conversion on my 89 GS500E.My side cover is not big enough to be machined for the slave cylinder.so I am selling it.It is in good condition.I'll take $30 for it. I have pics and a write up on the slave cylinder here...

I'll give the info,then my situation,and lastly my questions. The Honda VFR slave cylinder(the one on the engine),pushes a rod to release or free wheel the clutch.I measured an overall throw of the slave cylinder at 14mm or roughly .50in.Any movement passed that will result in the piston...

Not mine but thought I'd pass the info along.Pristine all original house kept 1980 CB650 1167 miles.Little Rock,AR http://advrider.com/forums/showthread.php?t=741240

I need to rebuild my front and rear master cylinders and calipers.Where should I buy parts?The kits I see cost more than individual Suzuki parts from a dealer.Should I "brake" down and buy the parts from the dealer? The black coating that is on my calipers has turned a blueish gray color.Can...

I am looking for a front wheel and axle bolt for my 1992 GS500E.I know the Katana GSX600/750F will work but it must be the 17x3.0.The 17x3.5 is to wide for my forks.It's also a swept spoke wheel,not the straight spoke wheel.I'm looking to pay $50 + shipping. Here's a pic to give an idea.

I am planning to buy and paint a wind shield/screen to hide the wiring and cables on my resto to running bike.I want to paint it to resemble a small faring around the headlight and bars.The last time I painted lexan,I masked it off,scuffed with 800 grit wet/dry paper,and sprayed rattle can...

I was chatting with a member on a tractor forum.He restores old bikes.I asked him about soldering some small holes in a couple tanks I have.Here is his response. Has anyone attempted this with a small plumbing type propane or mapp gas torch?I want a permanent repair not a JB Weld patch.

Suzuki GS500 bikes have a weak charging system.The system can barely cover the drain of the bike electrics.I know changing the lights to LEDs will help free up some power that is already there.There is a thread on GS twins where it's stated that up grading from a shunt style regulator rectifier...

I am posting this a little early but what the heck.I have a 1992 Suzuki GS500E I am restoring to running condition.This isn't going to be a top self resto.The bike is in pretty good shape except the front end.The bike hit a curb, if my info is correct.I am restoring to a safe running condition...

On Friday September the 30th 2011,I placed an order online through Amazon with Kinney Cycles.I will be giving my impressions of the seller here. Order placed 9-30-11 Ordered JT sprocket P/N JTF565.15 $10.95US $4.00 S&H 14.95 ToTaL Shipped 10-3-11 Awaiting arrival and will update when...

My puter crashed shortly after I started my resto mod and I lost all my before pics except these before pics of my virgin GS500E. After the resto mod.It was more mod than resto.The changes are subtle but performance was increased 10 fold.Pay close attention to the front end from the bars...

I know my disease doesn't quite fit in here as I have a perverted affliction for the Suzuki GS500 line of bikes.I've always had a fondness for Suzuki road bikes.So I thought that I would ask before I start these projects. I have a return to running restoration I am about to start on a Suzuki...