Search results

Welds are looking great man. you got it down pat. i had a felling you would love that welder. what settings do you use? i keep mine on 4 and i think about 45 for my wirespeed idr. its somewhere in that area. seems to work well on each of the 4 settings i only have to bump it down if im welding...

Lol great man! its been a pleasure reading along. best wishes to you guys!

Big fan of your work man. i read through your entire build on the 550. I want to say congrats on getting married as well and not just that but finding one you fit so well with. reading through that whole tread, one big thing i noticed (other than the bike work and how you just seem to adapt and...

Anybody have any idea on how to get a title in NC? ive been told that since my frame has been modified it can be classified as a custom. i really dont want to go this route and i have the title for the bike but somewhere a long the line it was filled out and never sent off so i basically have a...

Re: My Cb360 Build Log I like to make art in my free time and random doodads when i get bored so here's some of that as well made from a tractor seat, 6.0 2008 model gm cam and a random flywheel tired of not having a work seat lol i bought a new set of drivers and didnt want to...

Re: My Cb360 Build Log long story short i added a few more layers of glass and resin and then started trimming... a lot of trimming.. hell i cut most of the damn thing away and had half what i started with lol. anyways once all this was to a good stopping point i loaded the thing up and took...

Re: My Cb360 Build Log after lots more work first layer, and here which i should have said earlier, im not a huge fan of an abrupt bump or high bump on the back for a seat i think dime city cycles has made the best version ive seen on their brass cafe. im also a huge fan of mista2's...

Re: My Cb360 Build Log more pics. i hit post accidently on the last one hard to see the post because of the pipes so i put my arm in front of them so you could see the cuts and detabbing better rear view another from the side tabbs and seat bracket ditched next i began on the...

Re: My Cb360 Build Log Next i set the seat stuff aside and whooped out the grinder for a little assectomy!

Re: My Cb360 Build Log Its about that time again for another update. Since the last post ive added some clip on bars, removed tabs on the back, fasioned up a seat and hate it, cut the ass off, fixed the carbs (missing the idle screw mechanism) made mounts for my rear fender and shipped it off...

actually.. count me in. i have no life at all other than working till 5 during the week. if theres anything i can do to help even if its loading stuff id be more than happy to take some time off and make the 2 hr trip to where they are located. i want to help because i love these bikes and would...

wow unbelievable. good luck with all this. id love to be able to offer some kind of help but i live in west NC near Asheville. looks like all i can do is offer a sangwich and a caprisun if you make a pit stop on the way haha.

Following!

so glad to see this thing back in motion. this is a very inspiring build for me that i look through all the time!. for the longest time i was very pro side pipes. the more i see how you did yours the more im liking the low look.

haha! forums need a like button

also, thanks for the pics and info guys! very helpful!

new idle screw mechanism and problem solved!!! where the old one had broken off or seized in the screw hole it was broken off down into the threads about half way. it still had a small nub sticking out of the end which was against the leaver as supposed to. but it was adjusted way too high. i...

AHHAAAAA!!!!! now i see how it works completely!! good to see thanks! if my peice i ordered doesnt get here soon im gonna prob have to just stick a bolt in it for now

It does help. my carb bowl has the screw in it with out the bracket so it looks like its not supposed to be there at all and this is why i had missed it for so long. that part will be easy to mount but the inside part that you dont see in many pics is what i was concerned with. you painted a...

uh. there is no idle screw or cable and the bike idles at 4k rpm because of it.. prior to this the bike was only running on one cyl and some how had a low sooth normal sounding idle for one cyl. once i realized it was only one i fixed that issue to discover the new issue of no adjustment screw...