Search results

Thanks Teazer. I have the air screw 3 turns out on the 30 to get it idling, so I may move down a step or two. I know you were are just guessing with the main jet but any sort of ball park helps to someone with zero experience such as me. Any suggestion for the slide size? Also, have you...

A 3.0 cutaway is big right? Meaning there should be good airflow and subsequently a leaner air/fuel mix? Those guys at Sudco were not very helpful, the kept saying their jetting was proprietary for business purposes, as if I am going to drop $300 to buy a new set of carbs from them. Well it...

No mods to the engine that I know of but I have noticed my 73 CB350g has considerably more power than my buddies 69CB350. These carbs came with the bike but I understand what you are saying about retailers. If you do a search for cb350 carbs all you find are these Mikuni 32mm. Thanks for the...

So I got these carbs with the bike and I am having a hell of a time getting them tuned. Here is what I got back from the mechanic. Main Jet - 85 Pilot Jet - 30 Jet Needle 6dh7 Needle Jet - 159 P5 Air Jet - 2.0 Slide - 3.0 c-clip set at the leanest position Pod filters They also advanced...

Can you run a headlight using a capacitor? I was thinking about going with an electronic ignition, led or h4 headlamp, kick only. Any advice on experience with a setup like this on a 360 is appreciated, plus it should be relevant to the OP. Thanks

Re: '77 CJ360T (Café SOS) - Just about done (for now)! Hey Sonreir, Roadhawk on Johnson Creek should have a fender for you. If not I think I might have an extra 360 fender that someone started into with a torch.