Search results

Hey all, I got a 73 CB350 twin and thought I'd start to update some of the electrical components. So I got the radio shack 25a rectifier. I can see the really small + and - terminals marked on each corner. So I hooked up the red/white to the +, the green to the - and the other two wires to the...

For the cafe style knee dent tank, I will give your tank a whole 'nother look: Here's what the tank will look like when I'm finished. I now use epoxy primer for a durable base. This service costs $130, plus $25 to ship your tank back. If you want your tank and sidecovers completely...

Here's mine:

I dont know if this guy is here, but it looks like he is selling a fuse box but not delivering the goods. I just want to warn folks here. http://forums.sohc4.net/index.php?topic=55849.0

Here's a link to progress of the build: http://forums.sohc4.net/index.php?topic=42331.0 I got the seat pan from Sean over at Roc City Cafe. I did the foam (used gardener kneel pads from the Meijer lawn and garden section) The seat is firm but very comfy. I used Marine grade vinyl all around and...

The inside is leak free, but will need to be cleaned. No cap nor petcock. The petcock side is on the right with the 2 mounting holes rather than the single threaded bung. Unsure of the year. $140 shipped. - Sold

The last two "bigger" items I need to get are the seat and a chain and sprocket set and it'll be almost finished. Installed new piston rings and gaskets throughout the engine. Repainted and refinished almost every piece. Just before putting the exhaust and air filters on. Here's a quick...

Here's a tank for sale on ebay...

Well, I began my winter build and I'll keep updating this thread as I move along. Here she is the day after bringing her home. Bike only has 14,000 miles and runs strong. I went through and adjusted the valves, timing, cam chain, cleaned the carbs, then sync'd them up. Most of the work is going...

I got this a couple weeks ago thinking I would use it but I decided to go a different route. It's primed and ready for paint or leather wrapping. Fits CB750's and CB500's. Dimensions: Overall length - 32" Bubble height - 6" Pan width at front - 8.5" Pan width where bubble starts - 9.5" $110...

In decent shape. A couple small dings, a few scratches. Decals have a few gouges in them. Tank is clean on the inside. Comes with the petcock, and key for the top latch. $70 shipped inside the lower 48.

Im just curious about this to see if I can keep some costs down on my paintjob. If my tank is spraybombed, then take it in to get professionally clearcoated, will the paint fade underneath the clearcoat? Or will the clearcoat provide ample protection? Thanks,

I just got this bike last week and have done a full tune up and got it running pretty good. Already has the 4-1 exhaust, got some clubman's on order, pods and jets should be in the mail today, have a '74 CB750 tank that will be probably replace the '77 style tank. All depending how I want to...

Saw this on ePay and was curious why it's so expensive??? http://cgi.ebay.com/ebaymotors/Honda-CB750-SOHC-Giuliari-Style-Cafe-Racer-Seat-CB-750_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c39Q3a1Q7c66Q3a2Q7c65Q3a12Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem270281647804QQitemZ270281647804

This is the shape Im thinking about going for with my bike. How much would it cost to make this at home? Is it cheaper to just buy it? http://www.oldbikebarn.com/Motorcycle_Parts/Cafe-Racer-Parts/CB750-K-Cafe-Racer-Seat-Modified Thanks,

Im looking to start a CB750 cafe build this winter and am prepping for some equipment Im going to need. What size air compressor do I need? As far as the paint guns go, what's a decent gun without breaking the bank? I see Harbor Freight has nice pricing, but are the tools good? Thanks,

A weird subject line but didnt know where to ask this or how to. Hope I got the right category. Anyway, Im starting to plan how I want the tail/back of the seat to look. I thought I saw someone cutting the back half of a gas tank off and using that. Depending on the tank, the shape might look...

Bike runs good and shifts well. All electrical works. The front brake is a little sticky (needs to be cleaned). Has new clutch, clean carbs, new tires, new points/condenser, fresh plugs and oil change. Bike doesnt look as nice as the picture shows. Tank and side covers have scratches, small...

Would these work on a CB350 Twin? http://cgi.ebay.com/ebaymotors/6-OR-12-VOLT-IGNITION-COIL-HONDA-SUZUKI-KAWASAKI-YAMAHA_W0QQitemZ380059508516QQcmdZViewItem?hash=item380059508516&_trkparms=39%3A1%7C65%3A1%7C240%3A1318&_trksid=p4506.c0.m245

I just installed new clutch plates and adjusted the cable and the bike shifts much smoother. But I noticed when the bike is on the centerstand, and I put it in gear, the back wheel starts turning slowly. It didnt do this before. Is this normal?