Search results

I have a full set of CL exhaust with heat shields and mufflers - $200 plus shipping

what year did these come out of ?

Hello , I am looking for an XS1 (70-71 xs650 ) front drum complete with brake plate and linkage. I will take whole front wheel if need be , but I don't need spokes, rim or tire to be honest. Anyone sitting on one? thanks

VonYinzer I am in California, How much are you asking for it?

I need a CB/CL 175 sloper motor for a project- who's got one , and how much $ do you want for it? thanks Chad

here is what I had done while some other things were being fabricated. -- cut up stock mount and adda little metal, weld to frame forward of rearsets.. *** side note , you will want to ditch the CB350 kickstand and get a 500 or 305 kickstand instead as they are longer. When you do this mod it...

Tim yes you can remove the starter clutch, you dont need to put any spacer after removing. You will need to buy a starter block plug though. Capellini moto in Italy sells them for about 20 euro. Removing the starter, starter chain and starter clutch removes about 10 lbs. of weight, and makes the...

thanks guys!

before and after - 10 month transformation

I need a XS650 front brake drum and brake plate complete!! whos got one? thanks Chad

I am 5'11" , yes it is a stock swing arm.

Met Bruce from "The Moto Channel " at a VVMC vintage ride in Venice California, and he asked if he could do a piece on my bike.. umm ya ! here is what he put together http://www.youtube.com/watch?v=CjzQuA9NQ5s&feature=youtu.be

$1000-1200 includes the following 08 GSXR front end complete - $500 progressive suspension lowering kit for gsxr forks -$100 fork seals and fork oil- $50 harley dyna hub- $75 aluminum rim-$100 stainless spokes $100 all balls bearing conversion -$40 machined spacer for lower triple-$40 hyabusa...

I have a 68 cb350 knee pad tank , knee pads are off and very supple, tank has been blasted to bare metal. only one or two VERY small dents that can be fixed before paint. Send me your email so I can send you pics thanks Chad

just pulled this off the Deus blog

Kevin and Bryce, it was great to meet you and to ride to Deus! Hope we can get together again soon and do some more riding! Dont forget to put " born free 5" on your calendars 6-29 down here in Irvine! should be a great event. Kevin, thanks for posting the pics!!

call Chris at CPR fab 949-412-1971 he made me a killer stainless exhaust for my cb350 talk to him, he is fully capable of what you are looking for chad

the 69 did come with the "fat" "early" cam which is shown on the top in the pictures.. the fat cam only works with fat cam rockers.. you can not interchange the rockers between fat and thin.. the cam housings were different as well. The cam gear bolts need to be thrown away and new ones put in...

pic 2

Hi guys I was frustrated that oil pump gaskets were never available or were ridiculously overpriced on ebay so I had them made. CAD drawings were made from a NOS Honda part and then the gaskets were cut by a CNC gasket cutting machine. They are $4 each shipping included (in the US) I only have...