Search results

I'm looking for advice on what the jetting would be for my bike. I have carbs off a 74 rd350 and an r5 engine in my bike. If I run stock rd pipes and pod filters so I can put my battery box kinda where the stock air box is where would I start with jetting it? THanks.

Congrats on the bike and even more so on the granddaughter, an amazing Christmas around your way indeed

Also following. Interested in the seat I'm at that stage. Fiberglass pan? Relocating electrics and battery?

What did you use as seat foam? And did you get it upholstered. I'd be interested I'm a close up of your seat. Thanks. Amazing looking bike.

My weather app for lexington shows rain for the next 3 hours and then partly cloudy? Is it raining that bad there? My radar also shows its raining in akron and it's just cloudy no rain

Re: 82' KZ440 Brat'Cafe'?: Wiring, seat, final assembly Haha ass to seat theory I like that. Yeah I already made my fiberglass seat and was thinking of doing the same, drilling holes in the seat then fiberglassing bolts into it that will drop down into the crossbar on the frame and my boss...

Re: 82' KZ440 Brat'Cafe'?: Wiring, seat, final assembly Looking good man! Where'd you get that camping mat? I'm starting on my seat and was reading about camping mats. How thick is your seat going to be? Lastly, are you making a custom pan?

Lookin good man! Are those the stock gauges? And also how are you running the wires for the taillight? Thru the frame or just ziptie it to the frame?

Lookin good so far. I'm interested to see if you have any more pictures and details about the battery box and how you're setting that up. And how you're mounting the seat. I saw you said studs but what will the studs go into? The frame? Custom mounts? Thanks

I Didn't even realize I didn't include that. Yeah it's a 74 rd350. I got the battery sorted out now though

The stock battery for the bike is only a 5.5ah. Its a kick start

I was wrong I looked up the wrong part. They're 5ah and I called then up to verify. Thanks!

So I just blew $43 on a battery from batteriesplus bkuz they told me it was agm. When I went to pick it up I noticed it wasn't but they closed in 3 minutes so I brought it up today to exchange it and they said since its a lead acid battery that had been filled they can return it. I didn't fill...

Where can they be purchased from? do you have a link?

Thanks a lot redbird!i really appreciate it. from what i read in the electrical 101 i may need signal relays? but ill shoot over to 2sw and see what those guys say. Btw I'm a big fan of your avatars

I was looking at a halogen headlight unit. But let's say I keep the stock headlight and I go with this led tail light with the integrated turns. Then I get led turns for the front. What size battery do I need if everything else on the bike is stock? And what all would I need to do to wire in...

So I want to run all stock electrics on my rd350 aside from an upgrade to the headlight, and put in an all in one led taillight turn signal combo how do I determine what size battery I need? I'd like one physically smaller than stock. Thanks guys

Those appear to be the tranny forks and yes after you take te clips off (there may be some clips inside the case and some outside) they should just slide right out.

Thanks for the tips and encouragement. I was about ready to throw it away I guess it just takes patience. Sanding, laying filler, sanding, laying filler, sanding more, laying more filler. It's making me go insane haha I guess I just needed some confidence to keep going ill have to try the...

So I laid my glass over the mold and got that part done. Now comes the prepping... I need some serious tips on this. I put some icing over it and I'm sanding to try an fill the beginners fiberglass sh!t job and even it all out. I keep getting pinholes and I think I'm sanding to far. Is there any...