Search results

Hi, I am looking for 2 set of ignition coil for CB 350K or CB450K. Any one have these ignition coil or any over 3 ohm single fire coils x4 please let me know. Price should be around $110 shipped to Vietnam. If price is differed, also please pm me. Many thanks Viet

While looking for a finned cover to make my CB350 engine looking good, I found non of them on ebay or elsewhere so I make one using sand cast method and lathe machine. This is my new product: the sand cast finned alternator cover for CB/CL/SL350: The front side: and the back: On my CB350...

This is my new product: the sand cast finned alternator cover for CB/CL/SL350: The front side: and the back: On my CB350 bike: A closed look: Self Comment: BAD: 1. There is small tiny pin on the surface and almost unnoticeable if you look at it from 1 meter distance 2. The fins...

I need a completed set of CB350T starter + starter clutch + sprockets for my CB350 project. Shipped to Vietnam. Thanks Viet

Hi, I just have made this for my CB350 and several now for sale. This is a bolt on cafe racer seat (if you need a number plate bracket - then let me know). The seat pan and cowl is made of 100% 2mm x 5052 aluminum. The bracket is 5mm thick 5052 alluminum. Hiding under the cowl is the bracket...

You are real crazy, my friend said when I told him I will design a mold to press cafe racer seat cowl that fit my CB350 K2 and CB450 K3. I told him, I just do not want to pay $150 for a seat that made of steel sheet, paint and cover with low quality faux leather. In addition, if I do a good job...

Hi all you guys, I am rebuilding some GL400 cafe racer. However, the CDI of this model seems not available. Any one could help me buying some of these CDI box. Many thanks Viet

Any guy interested in these helmets. I am from Vietnam, really like it but this seller only allow local pickup. Good be a good deal for any one in Midwest City, Oklahoma, United States. Refer to the ebay item...

Hi, I have just produced this rear sets with following specification: 1. Longer pulling lever (95mm long) 2. adjustable pulling angle with 20 position each only 18 degree 3. It has 10 mm bolt which supported with a 19.5mm steel sleeve. This sleeve reinforces the footrest against heavy weight...

I received a pile of dirty and look like crap part of a CB350. The guy who has these parts is unable to rebuild the bike any more. Get them at cheap price. Month 1: This is what he sent me It seems I have 2 crank cases, 2 crank shaft and 2 gear boxes. These are engine part after clean...

I received a pile of dirty and look like crap part of a CB350. The guy who has these parts is unable to rebuild the bike any more. Get them at cheap price. Month 1: This is what he sent me It seems I have 2 crank cases, 2 crank shaft and 2 gear boxes. These are engine part after clean...

Hi everybody, I has built-up the idea of cheap, adjustable and good quality rear set for a long time after fighting myself with a set of aluminum rear set. What I learn from my first rear set (bought one) are: 1. Its pulling lever is so short that only fit to rear disk brake not the...

I see this rather cheap compared to those sell on ebay or in US: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190529438645&viewitem=&sspagename=STRK%3AMEWNX%3AIT I bought 1 but a bit worry when seeing this seller is zero star rated.

This is my CL175 which is just recover from scrap. I bought this one at US400 (noted that these bike is only few in Vietnam) in early 2010. Then it took me 16 months to get into shape. From scrap: To be a beauty: The front end is CB450 K1 and the tank is from a CA/CD175. The old...

Hi all members, I truly appreciate lot of tech tip that I have learnt from this forum and I hope you enjoy my cafe CB450K1 with some modifications so it look as if it is CB450 K0. This is photos of my bike <object width="425" height="344"><param name="movie"...

Hi, I am currently replacing my timing chain for the CB450 cafe. However, after days with blood and sweat, I could not make it right. Any one pls help me through this process. The issue is, if I add 1 more chain to the cam chain then I could adjust the timing a bit right but then the engine is...