Search results

Trying to go back to a stock setup and looking for some stock pipes. They do NOT have to be perfect. Let me know if you have something!

Nice running CB360. All original. needs only speedo cable and bleeder on front brake replaced. Comes with extra frame, motor, and other parts. clear Michigan title. Local pick up only (Metro Detroit). $1200. Just don't have room for this one anymore.

My dad and are in the middle of an overhaul on my 350. rebuilt the engine last fall and recently sorted out the wiring. trying to fire the bike up on the bench has been a fail so far. Sputters and huge backfires like the timings off but everything is spec'd according to the manual and timing...

I have a CB360 motor and frame I need out of my garage. No title. Motor was stuck, got it unstuck but haven't been back to it in over a year. Motor has a couple chipped fins. I got the bike from the original owner but it had been sitting for decades. everything was basically roached but motor...

So I've looked the part number up on this sprocket in a few different places and it always indicates it's a replacement for my cb350. However the sprocket post are tightly press fit into the original but are completely loose fitting on the new one. Has any one ran into something like this or is...

Anyone know a set of bolt on mufflers for a cb175 that will still allow use of the kick starter? I have yet to find some and an original set to command quite the pretty penny.

Looking for a cb360 tank thats ready to use. I don't care about the dents, dings, or paint condition. Just something that I can put on and will work. I Have an undented original paint cb500 tank I'm willing to trade if you're into that.

Just melted through mine during an acid wash. Looking for one that's not too bad inside.

Looking for an exhaust for my 1965 CL77 please and thank you.

I've got about a 3/8" in and out travel on my shifter on my 73' CL350. not an up and down movement but the actual shaft can slide in and out of the case less than a 1/4" can anyone tell me if this is normal ? It seems to be leaking oil from this area. Thanks for your help!

Hey guys looking for your help in identifying what may be causing this on the left valve seat of my 350. Is this normal? The first two pictures show the left seat and the third is the right. There is a noticeable difference here that was not there approx two years ago when the motor was last apart.

couldn't find this posted yet; maybe it was, but i nearly died. http://vimeo.com/115733204

I'd prefer the yellowy orange one if you have it but will take any color if it'll fit on a 72'. I'm in Detroit btw.

I had never had to use my kick starter but recently wanted to and noticed some back and forth slop in the shaft. is some play normal? if not, any idea on what's going on here or how to fix it?

looking for a 73'-?? xl175 top triple tree. this model accepts 31mm forks. let me know if you have something.

To me it's a no brain'r. leather. My Dad, who's opinion i greatly value, seems to think a marine grade vinyl of some sort. what did you go with on your seat and why? it's going on this. so I want to do it right.

I've got about a 3/8" back and forth play in my kick starter shaft on my 72'. this is causing a considerable leak. any ideas on what may be causing this? and will i need to crack the case to fix it?

Heard about this in case anyone is interested. I'll probably be out in front of Mercury Bar smoking cigarettes and looking AWESOME. EDIT: here's a link for more info http://www.oilysoulsdetroit.blogspot.com/

looking for the factory rear rack for a cb175. if your not using it on your cafe project think of me. I'll buy!

So you picked up a 72' cb175 at mid-ohio and now need to get rid of the right airbox vented side cover. OK, I'll take it off your hands. I'll even pay you American dollars.