Search results

This is mine. Not going to get around to the project. Had it a few years. Cost a lot, my reserve is way less. Good luck! - Woody http://www.ebay.com/itm/281113884412?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649

This is mine. I'm selling it. It's almost NOS. You won't find a nicer one. http://www.ebay.com/itm/281113878596?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649 Good luck! - Woody

Hey guys. I have an interesting question for you. I currently drive a 2007 Audi A3 2.0t, 6spd DSG etc. Buy the end of the year I am going to pay off my last credit card, and my student loan. I am thinking that it would be pretty rad to get rid of the car payment for a length of time too. I am...

I posted these in my build-ish thread in the tracker sub-forum... but I thought I would post them here as well. - Woody Without further ado. Here are some pics of the final product. I really wanted some 70's period looking shots. I love them. If anyone wants more detailed shots I can snap...

I am looking for a pair of brackets for the front reflectors from a CB360 fork. Park number 2 in the attached diagram. Let me know if you have a set you could part with. Thanks. Woody

Hey guys. I know I haven't been around for a long while but I think this deserves me to start posting again. Before I start I want to make it clear that I don't want to hear any "That's too nice to mod" comments. They are my bikes and if I can improve them in my eyes, I will! Anywho. This...

Okay guys... I'm starting a new winter project with my younger brother. We acquired a 1980 Honda CM400T... for free. It's in great shape, runs great, about the only thing wrong with it is that it needs new tires. Well, new tires, and the fact that it is undeniably ugly. After some discussion...

Wow! 100,000 Posts!

Hey guys I took the carbs apart from my 350 to clean/rebuild/rejet and I found that one of the carbs is missing the jet holder clip thing. I called the honda dealer and they can't get it anymore. Does anyone have a spare "parts carb" laying around that they would be willing to rob from? A...

Hey everyone, It's been a while since I have really been around. I haven't stopped working on my bikes. Here is the latest shots of my 1973 CL350. It's now sporting a '69 CB tank, CB exhausts, lowered 2" front and rear with CB360 front forks with racetech springs, custom seat (which I can't...

Hey guys. I'm thinking about removing the center stand from my CL350. When I had crotch-rockets in a former, faster, dumber life I always just used a swingarm stand to work on my bike. Anyone have any suggestions for one that doesn't look like it should be supporting a gixxer? Let me know what...

I am selling my Hooker Headers CB/CL350 scrambler setup. I purchased this exhaust off ebay. It had some rust etc and wasn't in the best shape. I cut the stock can off because it was missing it's baffle and the reverse cone and was kinda rusty. I purchased a brand new EMGO short reverse cone...

I am looking for a good set of forks from either a CB400F or a CB360. I don't need crowns etc... just the complete fork legs. Let me know what you have. - Woody

Okay guys, I'm selling some of the stock parts off my 1973 CL350. All prices are OBO + actual shipping. There are more and LARGER pics at the links below. Email with questons. jw@jonathanwooddesign.com I prefer paypal payments. Will ship to USA/Canada, only the ACTUAL shipping is charged. You...

http://hellforleathermagazine.com/2008/11/ncr-previews-30th-anniversary.html

I am almost done rebuilding my carbs and tonight I managed to break the TINY tip off the front of one of my Pilot Air screws. Does anyone have an extra? Or an old carb they have for donors? It is just like the one in this picture... not the more conical one from the earlier carbs. Very bottom of...

Okay, I know I kinda have this wrapped up in the carb cleaning post, but I thought maybe I would get some more info if I made it it's own post. So, I have an extra set of CB450 carbs in good shape. I am currently cleaning them thoroughly and installing new seals and o-rings. The stock jetting...

I have decided that I might try my CB450 Carbs on my 350. I started dissembling them tonight... they really aren't that bad. What I am wondering is does anyone have any special techniques to clean the carbs? I have removed the jets, needle, all the small bits. Can I just soak the small parts in...

Okay... I installed the other set of CL350 exhaust I bought and chopped the muffler off of. Installed the cone filters as well. Starts and idles well... maybe better then it did before. It does backfire and pop quite a bit after revving it up... I think this indicates that it is running lean...

I am about to have my CL350 tank painted and I am needing some inspiration. Post up pics of your favs. I want something that looks vintage/cafe. Not too hot rod... i.e. no flames. Show me some of your faves. Thanks for the help. - Woody