Search results

that sprocket holder shouldn't be able to come loose on a 500/550. There should be a large screw in 'washer" like ring to hold it in place. Like this: has reversed thread by the way ;)

hard parts about the 750 starter motor wires is that they are soldered in the starter, not bolted on like a GL1100 or so. So you'll have to extend the existing cable and solder a new piece on it ;)

yep, with the frame kit you can save yourself 2 days work of building engine in and out to work on head/cylinders for example. you can't even lift the valve cover on a stock frame, so you have a leaking gasket, you have to pull the engine.. and why blur the license plate? I only do that when...

thanks guys! and jep, got my inspiration from the Biltwell helmet (don't have on though :) )

just thought I'd share my latest build with you guys. After I finished my F2 (topic here somewhere) I bought a K2 2 years ago. Rode it for one summer as it was, just to see how good/bad it was. Turned out to be really reliable... so time for a modest rebuild... as I bought it: came with...

put the old girl on the lift today. fixed some broken tabs: the one that was holding the left footpeg broke of, it was just held on by one bolt and could be moved up and down welded the oil tank back to the studs in stead of the zip ties that were holding it up. made it rubbermounted as well...

excellent build! some nice ideas for my xs build as well :)

After I had rebuild my CB750 F2 I was on the lookout for an XS650. CB750: and after: and you see my other CB 750K2 as well. Since I had two 750's on had to go because I really wanted an XS650. so sold the green one and bought this good base but has some work to it: - fit a...

jep, push/pull is the way to go!

cheers ;) well the t3 failed on me as well! lost all of it's oil due to a crack in the oil filler neck which then resulted in a big bang, rods going through the engine and a big cloud! fortunatly all fixed now and back on the road again :)

thx! you're right about the gold though, some people told me the exact same thing before :) for now, the gold will be in the engine ;D Will see where I can add some details later on...

nice project! love the way you took care of the tank! had to look twice to see it, excellent ;)

hey thx! the color is reseda green. And didn't ride the bike with the kinked line ;) I knew that ment trouble... But the bike is of the road for now. Had a leak on the head (the camshaft pucks) and when I took the cam out, saw it was really blue and totally out of spec. It also had a K head...

jep, lot's of things work with ground as a trigger, neutral light, oil light, clutch safety switch... but if you just ground the green red one at the solenoid (no need to run it to the bars) you can just run the yellow red one to the starter switch with a + offcourse ;)

you need to ground the greenred wire from the starter solenoid if you delete the clutch neutral switch thing. That's what I did anyways...

finished the comstar swap, just bought a F1 fork and rear since I allready had the wheels... cut the old spokes, got the rims powdered, painted the hubs, installed new bearings and new spokes. With a set of new tires. Also added a second caliper and rotor with adapted speedo pickup ;)

thx but in the meanwhile some troubles... found a little puddle of oil under the bike... The longer oil line had a hole in it... went to a shop in about 30mins from where I live where they mounted a new braided hose for about 20dollar so that's cheap enough! unfortunately one connection was...

geen nederlander maar een belg (hoop dat ik er ook bij mag :) ) hier mijn CB750 F2 toen ik hem begin vorig jaar kocht (komt dan weer wel uit NL..) en zo is ie nu: Het is mijn eerst moto, ben er eigenlijk maar in maart dit jaar echt aan begonnen wegens wat andere projecten maar staat...

hey thx, I really don't like bar end mirrors, it's like mickey mouse... so that's why I went for an original one, didn't like it at first either but doesn't bother me anymore and its easier then no mirror :)

that's a lot of wires... here's what I made of mine: original on top, new one bottom