Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
1978 Cb750k Possible carb issue? No power in first gear.
hey guys, it’s been awhile since I’ve been on here. I’m having an issue with my CB 750. A little context I did the cafe thing, got the bike going, cleaned the carbs, replaced suspension and pretty much everything to get it going and rode...
Hey guys I wanted to see if you all might be able to lend me your expertise. I have a 73 cb750. The bike has been running and in good working order for awhile now. When I first got the bike i went through most of the recommended maintenance stuff and the carbs were an issue. I had to...
Hey guys! Have a 78 cb750 that I just switched from clubmans to clip-ons and now want to relocate the ignition. Because my bike is a 78 have the bigger ignition with the lock. Because of the size and the lock it won't fit well any other place I want to put it. I went ahead and purchase a...
So I just switched my bars from clubmans to clip-ons and I'm now having a problem with the master cylinder. The way the clip-ons are designed the mounting part gets in the way of the master cylinder. (FYI these are Chinese billet clip-ons.) I am able to mount the MC, but the angle of the grip is...
So I pulled the forks off to pull the headlight ears. To do so I had to pull the caliper mount loose to get the forks out. Anyways after I put it all back together I'm now having break issues. Once I get everything adjusted with the wheel spinning free and I pull on the brake handle the piston...
So I have a cb750 and I was replacing the stock headlight ears with aftermarket ones. Anyhow to Pull the front forks off I pulled the front end of the bike off the ground by attaching ratchet straps to the to my I beam in my basement. I attached the ratchet straps to the handle bars. After...
WTB cb750 final drive flange. I need the newer one like the one used on the 78 model. It's 10mm wider. This is what it looks like
Looking for one that is in decent condition.
Thanks!
Sent from my iPhone using Tapatalk
So I have a cb750 and it currently is running a stupid 16inch Harley rear wheel. The bike is actually a 78 with a 73 Engine. I picked up a 18 inch rear wheel that I want to use, but I'm trying to figure out which tire size to get. I'm wanting to get Avon Roadriders.
So after some research I...
Looking for CB750F (super sport) SOHC FUEL TANK. I will consider any condition. So if you have one you want to get rid of please let me know.
Thanks!!
Sent from my iPhone using Tapatalk
So I'm currently have a set of 12 series progressive shocks on my cb750. I'm pretty sure they are the recommended stock size so I think they may be 12 inch. . If I wanted to switch to say 14inch could I still use the springs I have now and just buy new 14 inch shocks? I wasn't sure if the...
So I have a cb750 that currently has a 16 inch rear wheel which I really dislike. I got an old parts bike in the hope of using the rear stock 18 inch wheel. Could I get some opinions on this rim? Obviously I would restore the rim if I keep it.
Do you think it's too far gone or do you think...
So I purchase a Regulator rectifier combo from Dime City Cycles. I opened the box & the wires dont match the instructions. there is supposed to be one black & one white wire that you plug into the black wire & white wire that connected to the original regulator. Instead of the black & white...
So here is my bike. This is more less a mock up right now with the new tank & seat. Im in the process of adding the rear hoop, de-rusting/painting the tank and getting her running good. Im basically just getting started. FYI Im a newb when it comes to this stuff. But Im having a great time...
So Im working on my first build, a 78 cb750K. Anyways Im getting rid of the ugly 78K tank for Super Sport tank. The tank I have is in a bit of rough shape, but I actually like the color scheme & IMO the old paint & surface rust adds character. My thought is I could try clearing it & if it sux I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.