Search results

I'm rebuilding a CB350F. I have a 4-1 exhaust and K&N filters. I'm also thinking about camming it a little. I have only been able to find #75 jets available for it. Does anyone know where I can get a set of # 80, #82 & #85 jets for it. I already have # 40 slow jets for it, but have been stymied...

I think I'll be able to go. It's not too far of a ride so I might make a weekend out of it.

I can usually be caught at Gridas in Richlandtown around 9PM om Saturdays. And I'm sometimes seen filling up at the MegaWAWA in Souderton on thursdays Some say he's been spotted doing over 100 MPH on the Apiarius going down the Sellersville hill on 309 towards Telford...all we know is, he's...

Yes that would've been myself! I'll be busy the rest of this weekend...but anytime else is good

Anyone want to get together for a ride in the Northern Bucks/ Montgomery area.

Anyone know where I can get some oil/wax or whatever is used to retreat a vintage stockman oilskin coat?

Okay I've been lurking on this thread for a while, good stuff but could use some more info...so here goes 1. Do not use the white beaded Styrofoam unless you really like a mess..it also does not shape easily. Use the blue or pink expanded polystyrene insulation. 2. When building your buck...

BTW...I'll be up in Richlandtown again this Sat 5/15... at Grida's...then maybe the A&N Diner later in the evening!

N3...I know what ya mean...she really warms up to you after a few miles....had her just over a week and already put 700 mi on her!

Well the river run went real nice...great weather for it. A buddyof mine was camping at Dearwood so stopped in to say hi to him. Saturday did some PM work on her, adjust the clutch check brakes tighten chain, adjust valves...etc. Sat night went to Grida's in Richlandtown. Windy as hell on the...

18 years huh? sounds like my Triumph Sat in boxes for 20... Paul Masson...I build no bike before it's time.

It's still bare but i've got most of the welding done, the forks are completed the rims laced and trued ,the brakes refreshed, all the machine work for the motor is done. It's the same ole story 90% done and 90% to go. By the end of the summer I should have it on the road...just a matter of...

Got a new ride for a while A '73 CB350F. Somebody painted her (mercifully) a bright yippee! Yellow. The bike looks like it could have rolled off of the showroom floor yesterday. I've had her to work with me twice this week and I'm going to Ralph Stover Park this afternoon and do the river run...

East side!!!!!!! Stock answer is in between Argus and Almont Stock response...huh?!? Standard addendum...next to Woxall and Naceville. At this point their ears are starting to smoke. But seriously....I live in Tylersport, Montgomery County It's right between Quakertown and Lansdale...or...

Boomer in Tylersport....we got a whole cadre goin' here. I'll have to get some of my other ton up friends to join up. 20 years aviation maintenance...Q-town and Pennridge airports...last 5 in sales in Oaks, PA. Also have a small biz...pools

AFNGFPA......Hi all. I'm Boomer also from the philly area. Telford to be exact. Tylersport to be precise. No cheesesteaks for me thanks...those things will clog up an Amal faster than improperly applied tank sealant!