Search results

mexico, its hard to parts here.. yeah i saw it before, i think ill try them. Thanks

yeah i will get everything cleaned before i put everything together dont worry haha, getting the piston rings has been a nightmare and it has been collecting duct for about two weeks, any online store you could recommend?

here are some pictures of the pistons and the bore. i bought a set from cb750supply.com but the compression rings weren't thick enought to fill the compression ring groove. i measured and the piston are standard ones 61 mm. Thanks again. Also i would apreciatte if somebody could just confirm me...

Hello, i need the piston ringos for my cb750 f 1976, bought a set from cb750supply but didnt work so i had to return them. Anyone could recommend an online store to buy them? thanks. Hope somebody can recomend based on previous experience.

Hello guys, i've been living in the City of Chihuahua, Mexico, for the last year and today i got the chance to visit, what it used to be, the house of Pancho Villa, one of the most prominent Mexican Revolutionaries. His house is now a museum and in this museum is in exhibition the car in which...

it a 61 mm solid for me, as i stated before de rings, when speaking about the diameter, fitted perfectly when introduced on the bore cam and when tried on the pistons that why i think my pistons are not oversize, the oils scraper ring just wasnt thick enough to fill the space where it goes, the...

i tried the ring on the bore cam and it fitted perfectly also

i'll get a refund, later ill post a picture of the pistons hoping sombody can help me out.

uhm, i got lost at mfg, whats mfg? and there could be a possibility that the engine got different pistons and the last owner didnt know or forgot to tell me that detail

yes, the problem was in the vertical section, so they recomended me to buy the oversize ones, but i dont know if this is reasonable when i had the correct diameter.

Hello everybody, recently i bought a set of piston rings from cb750supply.com for a 1976 cb750 f, as far as i knew the engine was fully stock, so i bought the standard size ones, when i got them i tried them on and the diameter was ok because they fitted perfectly BUT they weren't thick enough...

Does somebody has one? the part number is 11351-300-060, send me a PM if you have one that i could buy. Thanks.

I need the dynamo cover for my 1976 cb 750 SOHC (part #11631-300-040) & also the right side cover (part #83600-392-002A) hope somebody can help me with the parts. thanks in advance.

vale, lo checare hoy que sakga de trabajar, saludos.

Hey tranks men! well this is what i got for $6000 pesos ($480 dlls) <a href="http://www.freeimagehosting.net/ighbe"><img src="http://www.freeimagehosting.net/newuploads/ighbe.jpg"></a> After first cirgury <a href="http://www.freeimagehosting.net/zu96g"><img...

hey i've seen your work on pipeburn.com really nice bike i really liked the tail section, actually a friend of mine is planing on buying that same gl125 after watching how yours turned out. for the moment i'm not sure of what i really want, i'm between the cafe style because of the racing look...

hey there, i don´t really know how to properly introduce myself to this site, so i`ll go straight to the point. I`m from Baja California, Mexico, Mexicali to be more exact. for the last couple of years i fantasized with starting a project and just couldn`t get the basic stuff, a bike. last month...

did someone bought them? i just got the news that mi bike needs all four of them and it'll be really helpfull if somebody had any feedback on these. i have a 1976 honda cb750f is there any diference between a cb750k and a cb750f? will these piston fit?