Search results

Just an update on your post. I recently have been dealing with Milwaukee cycle and they have the best customer service.

HI ALL IM HERE IN THE SOUTH SIDE OF MILTOWN. WOULD BE NICE TO MEET YOU ALL AND GO FOR A RIDE THIS SUMER. CURRENTLY WORKING ON A CB350. AND A 65 DREAM I HOPE TO HAVE THEM BOTH DONE FOR ROCKER BOX 2013.

you selling the tank? how much? if you need the stock handlebars I have a set I took of my cb350.

maybe you dint mix the hardener with the clear the right way. the clear i use is 4 to 1. if not enough hardener it will blend with the color and make it a lighter shade. also if used clear without any hardener like the duplicolor they have at auto parts stores your first coat should be very...

bike was sitting out in the Wisconsin weather for 4-5 years before I rescued it, yea rusted. valves also looked like crap. I cleaned the carbs and put new plugs and it fired right up. fired up like 5 time and then she died no compression. I found it with a 65 dream 305 which will be my next...

I did a light hone job already the pitting is still there cant really feel with my nail but can see it. well I just did a lil reading and if im correct as long as the bore isn't over 2.524(64.11) I can hone some more. piston is at 2.5192(63.98) so its good. ??? so if I hone to 2.523 and piston...

thanks for the help. I'm thinking I will have to buy some new pistons.

Can anybody tell me whats the biggest i can hone the cylinders on a cb350? I took my engine appart to replace the rings, timing chain, and gaskets and found the cylinders to have some rust pitting. :-\

this is how I found her, and what I have done so far. As you can see I made my own café seat but I like the flat style seat better. still need to shop some of the back. Now im starting to take the engine back out to rebuild it. i replaced the front wheel with a cb360 disk conversion,knee dented...

Just wanted to say hi to all. Im new to posting but have been reading post from other members getting tips and so on for about a year know. Im currently working on a cb350 I got from my sis in law who had it sitting in the yard for about 5 years. but thanks to allot of you ive come to learn a...