Search results

Hi, guys! I am in the middle of a project and wanted to poll the group...sorta. I haven't started a build thread yet. But in the garage is an 836cc CB750 w/ CycleX cam, CR carbs (on the way), 2" extended swingarm...and some other bits...no real work has been done other than building a pile...

if anyone has a parts bike, i'm looking for a titled frame. let me know what you have...thanks! I'm in Los Angeles, CA. But shipping is ok for the right part.

I am looking for two 21", 40-hole hoops to build a set of custom rims. Aluminum undrilled OR steel undrilled, ideally. If you have a set drilled...let me know exactly what they are... I'd like to find both the 2.15 width and the 2.5 width, if possible. Let me know what you've got! Thanks Bryce

Details: 1975 Honda CB750F motor 657B carbs, Cleaned, rejetted w/ Velocity Stacks #120 Main Jet #40 Idle Jet Idle Mix screw - 1 1/4 turns out. 4 into 2 Headers with shorty tips and glass packed, 8" baffles. Stock coils and points Float Height on all bowls (see pic) The Problem...

I am looking for a clean set of carbs for my newly acquired '75 CB360 Twin. Prefer they are running...and not in need of rebuild. But they don't have to be "like new" either. Thanks Bryce

These aren't pro photos...but at least you get a good walk around...

Here is a tail section I bought of ebay and never used. Paid $115 plus shipping. Taking offers... White gel coat...never painted.

Keihin CVK32s. I got these with a motor I bought but they aren't the carbs that actually go ON the motor. So I am selling cuz I can't use them. I don't know their history and I have never used them...but they look pretty decent. My assumption is that they should be disassembled and cleaned /...

So here goes. This is my first motor build and I'm going all in. I love the CB500 so I decided to start with a hot motor and later build a bike around it. I scored a $50 motor from CL which I am using as a platform. At this point, I only have the original motor so I started breaking it down...

I am doing a 600cc Big Bore on my CB500 and need a 650 cam to go with it. Anyone have one?? Thanks for reading!

1972 Honda CB500 Cafe I love this bike! Baby on the way...wife politely suggests its time to move on. Seriously, I might cry when it goes. Video: Custom items: MAC 4-1 Exhaust Hand-made one-off tail section with leather seat cover Drag bars Billet aluminum side mount...

Hello gentlemen! I'm finally starting this thread on here. I have been keeping this thread over on SOHC4 forum...but thought I'd share over here now that the project is nearly complete. Anyway...I bought (for way too much money) a '71 CB750 Cafe. I bought it on FeeBay out of state...

I need to buy finned stator and points covers for my 1972 Honda CB500. If anyone has a lead on some I'd really appreciate it. Thanks Bryce

I need a Rubber Knee Grip (left) from a 65-68 CB450 KO "Black Bomber". I only need the left side...but would consider the set if the price isn't outrageous. Thanks for looking! Bryce

I think these came off a Ninja 500...but not sure. They are dirty...but good rebuild candidate. I've never used these...so I have to assume they need rebuilt. $100...

Hi, guys! So I am so close to getting my bike done I can taste it. But the guy who usually does my welding stuff broke his arm. Anyone close to 90019 that can help out on some light welding bits?? Thanks Bryce Needed: Weld on new bung and RE-seal modified seams of gas tank. After grinding...

Anyone have something cool for my project...or just know of where I can score a petcock with a cool cusotm look? female 16mm x 1.5 thread, dual outlet.. Thanks for looking.... Bryce

this topic is fitting cuz I am also looking for a nice custom looking petcock (female 16mm x 1.5 thread, dual outlet) for the bomber tank. Please show me some options if you know of any...slim...custom...polished preferrable....

Left KNEE GRIP for 1965-68 CB450 "Black Bomber" Gas Tank I just need one LEFT SIDE KNEE GRIP/PAD for my Cb450 Gas Tank.... Anyone??

This is what I designed out of some scrap pieces of aluminum. The scrap was some sort of body piece from an old machine of some kind. Cutting it up.. Mocked up.. Welded up.. On the bike..but gonna add about 1.5" to the seat area. Its too short.