Search results

If you're looking for these, you know the details. VM28 Flat Slides. Never installed. $180 + shipping. todd.indiesol@gmail.com if you're interested. Thanks for looking.

A bunch of friends made the ride from Portland to OR Hwy 218, which connects the towns (and I use that term loosely) of Shaniko and Fossil, Oregon. The highway itself is only 45 miles or so, but is filled with corners, some of which are quite technical. You have uphills and downhills, some off...

I was lucky enough to pick up this barn fresh 1974 R60/6 a few days ago. An old airhead has been on my short list ever since my love affair with older bikes first started, so when I saw one I could afford pop up on Craigslist, and the ad was only like five minutes old, I jumped on it. It's...

Well, the summer has come and gone, along with a good portion of the Fall. I hope all of you were able to spend a lot of time in the sun, preferably on two wheels. Let's see some pics of your road trips. I know sometimes we get some of these anyways, but I'm putting out an open invitation to...

I don't want to clog the board with these, and I know there are already a few, but I wanted the esteemed opinion of the group on this one..... I've got the opportunity to buy a '74 Kawi 400cc Triple. Complete, but non running (supposedly ran when parked). Not cherry, but not terribly rough...

Nothing special Wrench. Ride. Repeat.

Kawi race bike. Way fast. GyroCam Onboard Runde Nordschleife Motorrad

Going for a ride with some other local rockers tomorrow. I know it's short notice, but if you're around, come down and check it out. Meetup info below. 2pm Bridge City Cycles 2119 n. Kerby Portland, OR

I recently just put a CB400F back on the road after sitting for many years. The first shakedown ride around the neighborhood and I was hooked. I wanted one before, but I MUST have one now. If you know of any project CB400Fs in the pacific NW, or have one yourself you're willing to part with...

My GS has an automatic cam chain tensioner with a spring loaded pushrod that constantly exerts pressure on the chain to keep it taught. As the chain stretches, the spring pushes the pushrod further out to take up the slack. In theory.... After chasing down a very slow oil leak for the last...

Vintage racing and swap meet this Saturday at PIR. Schedule here. Flyer here. I've been told that there will be a parade lap during lunch. I'm excited to take my GS out on PIR for a spin. To hell with the parade lap speed limit....

I have new shocks and springs for my GS1100, and I plan on doing new shocks and springs on my 360 as well when I get there. I'm looking for recommendations on a decent, affordable spring compressor that will do the job. I'd also be interested in any plans for a DIY spring compressor. Thanks.

A friend of mine in Portland has recently opened up a motorcycle shop specializing in vintage British and Japanese bikes (but working on them all). This is not an ad for his shop, but rather a post about the Grand Opening party, because it's sure to have a lot of old bikes of all kinds...

I've seen a few other first person ride videos from members out there, how about putting them here ? I love seeing the different roads and topography everyone lives around. New video added 8/4... I've been friends with this guy JD for years, but we've never really gotten to ride together too...

So aside from a few things that won't dramatically change the appearance, she's done. Finally broke out my real camera and did the best I could in my garage, as our normal Washington State weather prevented me from taking any outdoor pics. Bought for the purpose of pillaging and plundering...

I just had my GS pinstriped by Jeff Wolf in Vancouver, WA. The quality was amazing, the service was the same and he backs his work with free touch ups when needed. He free handed the tape line as well as the design on the top of the tank. He did some amount of striping on all the tins and was...

The Oregon Vintage Motorcyclists annual swap meet is this month. Sunday, May 22nd 10am - 4pm Benton County Fairgrounds 110 Southwest 53rd Street Corvallis, OR I'll be riding down from the Vancouver/Portland area on my GS, and will likely be meeting a few people in Beaverton. I hate I-5 so I'm...

http://bcove.me/pva07lg3

Full Dunstall kit on a titled CB750 for $1000 This seems like a good deal to me. I want that tank.

We've been putting together group rides and meetups on nice days out here for a couple of months. The attendance has surprisingly steadily grown. We put together a ride for yesterday in Portland. We had gotten steady rain for a few days, but it stopped Friday night, and it was sunny and 42...