Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Forgot to add location: Michigan City, Indiana 46360.
I have had this bike for about 10 years now and have given it a complete rebuild from top to bottom. Below is a list of just about everything that has been done with it.
Rebuilt brake calipers completely
Upgraded SS brake lines
2007? ZX10R...
I got the smallest amount I could to build my cafe seat and have a lot of it left. The dimensions are 21"x26"x2". It is black. This stuff can be shaped easily to make it fit any bike or idea. I'm willing to rough cut it to approximate sizes if there is enough interest for me to do so but I would...
I have new tires on my bike but the bike has been sitting on them long enough to create flat spots. is there anything I can do to make them normal again?
I've done some searching on the bay and also checked out several sites on the net but haven't really seen what I'm looking for. There are a lot of scissor jacks but they weight 25+ lbs. Since I've chopped off my center stand I only have the side stand. If I get a flat tire on the road what am I...
Is there any reason these two paints won't work together?
http://www.paintdocs.com/msds
search by Item # (aka UPC number)
026916946942
026916714107
Both seem to be Acetone paints if i read the sheets properly.
I put down the primer (1st number) and let it dry for 24 hours. The paint got...
Deleting various stuff on the bike and this one has me thinking twice. Are they mandatory? I trolled the Indiana law bullshit legal speak and couldn't find anything that they are required. Do some states mandate them? Why have a kill switch and a keyed ignition? Educate me masters.
It seems like some paint is really difficult to get off. I have tried sanding before and let the stripper do it's thing but am not having any luck. What did they use in the 70 to make this paint so tough and what are some good products you guys would recommend. ;D
I'm wondering if anyone with a 650 can measure their xs650 starter hole to see if I can use it on my xs750. I found a block off on mike's xs but I hear he doesn't like answering questions about cross referencing parts for other bikes.
Jochen Miller - Classified
This is the new favorite of the week for me. The track blows my mind at about the 3:30 mark. The whole tune is worth the listen. I really need to dig my turntables out of storage. I'm going to DJ'ing a charity event in Chicago at the end of the month. The organizer...
I'm really on the fence about using fenders at all on my bike or maybe something minimal. With an air cooled engine I'm thinking it would not be that big of a deal. Just wondering what the thoughts of everyone was on this. I don't think I'll mind the occasional extra wash. Road building season...
This is the first motorcycle I can call mine. I picked the bike at the beginning of June for $300. It had not run in 6 years but included a few extra parts. The owner and I shoved the heavy beast on the trailer and I drove home happy and scared. The PO told me he thought the carbs needed to be...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.