1-1/4" Exhaust Reducer

[Jesterhead]

Hey everyone,

I have a CB125s and and looking into exhaust now. Picked up a "hooligan" muffler from DCC which comes with a reducer which brings it down to 1-3/8". Does anyone know of a kit to bring it down to 1-1/4"? Or, tips on the quick and dirty way to get this secure. Should be relatively simple for even me to fab up some shims, but if something pre-fab exists, I'm sure it would be cleaner than anything I'd rig up.

Thanks!

 

[CALfeRacer]

Check autozone or O'reilly's or somewhere similar. They have a bunch of exhaust reducers, I got one that went from 1-1/4 OD to a smaller ID that was just right to fit on the 100 pipe I put on my 125.

 

[irk miller]

http://www.mandrel-bends.com/catalog/

 

[joea]

The best thing to use instead of the reducers that come with the mufflers is a piece of tubing that fits inside your muffler and then machine the inside dimension to fit your head pipe or weld it directly onto you head pipe.