Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I'm looking to put new tires on my '72 CB350 over the winter, and it seems after looking around the forums that the stock tire size for a '72 is 90/90-18 front and 100/90-18 rear. my current tires that came on the bike when I bought it are 3"/19 front and 3.5"/18 rear. was 19" ever a stock size for the front wheel in '72 or is that an aftermarket wheel? I posted a few few pictures to help decipher.
anyway, I rode the bike around last summer in it's stock form and it rode pretty smooth so I'm fine with leaving the current wheels on it. new tires are a must though. I'm still a beginner rider so I don't need anything too racy, but I also don't want to skimp on tire quality. any suggestions for a good street tire with a sleek look to it?
The 19" wheel was on the CL350, so that's no big deal.
If recommend the Avon's as well......but is that your bike with no fork brace? If so, I'd suggest putting even the stock fender back on - especially if you're a new rider.
The 19" wheel was on the CL350, so that's no big deal.
If recommend the Avon's as well......but is that your bike with no fork brace? If so, I'd suggest putting even the stock fender back on - especially if you're a new rider.
Yeah, I've seen the Avon name throughout similar threads. In one thread I remember reading Avon had discontinued the stock CB350 size tire though...?
You're the second person to point out my lack of fork brace. The bike is not finished in the photo I posted and hasn't been ridden yet as a cafe. A friend of mine (who is also going to weld in a new tail brace since I chopped mine) is going to help me fabricate one. Unless you know of anyplace that might sell something already machined and ready to bolt on???
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.