1973 CB350

riotcontrol

Active Member
Looking to sell my 1973 CB350 Twin. The mileage is currently at 17,121. I can snap more pictures of anything you want, just send me an message or reply and Ill get the pictures in the next day or so.

Some things that I have recently done on the bike:
Changed oil and filter.
Cleaned carbs and replaced old crappy pod filters with new UNI filters.
Drained front brake, flushed system and re-filled with brand new DOT3 fluid.
Battery is less than one year old.
New turn signal lens.
New spark plugs.
Timing set (static).

I know that the bike will need some things to get it in perfect shape, off of the top of my head, the following needs to be noted:
Tires are dry rotted, both will need replaced in the near future. Both tires hold air and will likely be fine for a short ride. I have no plans to replace these tires prior to selling the bike. I do not have a trailer, so one will need to be brought to move the bike, or you could ride it home if you're feeling dangerous!
Chain and rear sprocket don't look too bad, but while removing the rear wheel for a tire replacement, I would recommend changing them, as well as the front sprocket just to be sure.
The locking aspect of the gas cap is broken m. It still keeps the gas cap closed, but it can be opened with anything from the original Honda key, to a flat-head screwdriver.
Inside of the gas tank is a little rusty, but there are no leaks.
One of the exhausts is painted black. The other is chrome. I don't know why the previous owner did this. Neither of the exhaust pipes look to be in bad shape. Might be as simple as painting the chrome one, or putting some nice header wrap on both of them.

Its not a perfect bike by any means, and my asking price is negotiable due to the issues with the bike.

Asking price is $1300 OBO. I will entertain trades of equal or lesser value + cash. Not looking for anything in particular, but it cant hurt to try. I have the title in my name ready to be signed over to the new owner.

cf762914d709d10577067ff0c282fad7.jpg

ecd13b5f8216e6bb6e46950f089d47ea.jpg

4196c4b5bb30735dd456a0688f8f7e1c.jpg

7e161d200f20896a8b781beb34bf2ad2.jpg

64b4b298f0b1904b427b1782d7519e2e.jpg

6971dac5f7311af37c16a0b3414e982a.jpg





Sent from my toilet
 
Bumpity bump.

Price reduced to $1200. Also looking to trade for a welder and welding supplies.


Sent from my toilet
 
Nice job! that was a nicer 350

I have an AHP200 AC/DC tig inverter welder I am looking to upgrade if you sold the bike and want to blow that cash now... I'd take $800 for it.

81LmZUx4GeL._SY355_.jpg
 
Tune-A-Fish said:
Nice job! that was a nicer 350

I have an AHP200 AC/DC tig inverter welder I am looking to upgrade if you sold the bike and want to blow that cash now... I'd take $800 for it.

81LmZUx4GeL._SY355_.jpg

Thanks for the offer, ended up going with a new Hobart 210 MVP.


Sent from my toilet
 
Back
Top Bottom