1974 CB360 Top Bridge

[pkoster]

Took my forks off to replace the seals and found that the top bridge/triple was cracked... seems like a common problem.

Anyone selling?

(I assume this cannot be repaired with welding)

Thanks,
Peter

 

[taggat]

I might have one laying around, Ill try and remember to look this evening.

 

[pkoster]

Thanks, appreciate it. I'm located in Toronto btw.

Sent from my KFAPWI using Tapatalk

 

[williamng]

How long can you wait?

I'm taking the triple tree off my 1975 CB360 probably sometime in May.

I'm also located in Toronto.

 

[pkoster]

Thanks for checking. I found one on e-bay - on it's way.

thanks all for checking...

I'll post some picks when I get it cleaned up and installed.

 

[pkoster]

I'm also located in Toronto.

Where do ride in the GTA? Still using the CB360?

The weather is finally great here, so I can't wait to get mine back on the road. I did a little spring maintenance on mine:
- Removed carbs - cleaned them up. Need to balance them once I get my port adapters from common-motor collective.
- Polished up the carb vacuum lids (mine are very pitted, still working on them) & polished up the float chamber.
- removed forks - putting new seals in them.
- stripped all the crappy clear coat off them and now sanding them to get back the clean brushed look. Debating if I polish then or not, right now thinking I don't polish them up.
- Will de-glaze the front disk brake and replace the pads.
- Replace top tripple tree - that I found was cracked (broken and held only by the fork bolt) - will strip and paint the replacement when it arrives.

Cheers
Peter