The build brings us to today, 8/27/11. I fabricated the battery mount, which will be located under the seat hump. I wired up to test and so far everything works. Lights, horn, front blinkers, and the starter turns over. I am not getting a spark to the plugs, so the diagnosis begins. It could be the coil or points. I will start with those first. I will remove the mounts next and spray paint flat black, as to not leave any metal bare and re-install. I should have the seat and tank back this week. Once I have the seat in place I can neaten up the wiring underneath. I will update as soon as I have them in place.