theholybull
Active Member
Neither of my bikes are good for more than an hour of riding due to riding position and the vibration. I need something that i can take on trips more than 30 miles. I had been given the wing 10 years ago by a man who was moving to Florida and didnt want to take it with him. I dug it out of the shed and tore in to the wing.
pics fresh out of the shed
The solenoid is shot, and I only have spark on the 2 rear jugs. I think I found the problem in the wiring to solve the spark issue but i need a new solenoid but aside fro that its in good shape. As of now I have it stripped down to a roller and engine. thats probably all Ill use from the stock bike. I have the bike at the height im after, I just cant decide on weather to chop it or cut the springs. The back of the frame will be cut and refabbed as well as the front of the frame to fit the new tank. There is a ton of work ahead.
Heres a pic of the direction I have in mind
still have to figure out the rear end, there's always tomorrow.
Bull
pics fresh out of the shed
The solenoid is shot, and I only have spark on the 2 rear jugs. I think I found the problem in the wiring to solve the spark issue but i need a new solenoid but aside fro that its in good shape. As of now I have it stripped down to a roller and engine. thats probably all Ill use from the stock bike. I have the bike at the height im after, I just cant decide on weather to chop it or cut the springs. The back of the frame will be cut and refabbed as well as the front of the frame to fit the new tank. There is a ton of work ahead.
Heres a pic of the direction I have in mind
still have to figure out the rear end, there's always tomorrow.
Bull