1978 CB750K Parts

One80Auto

One80Auto

Active Member
I have a lot of K8 parts I am hoping somebody needs. I am keeping the frame, engine, carbs, front hub, and headlight bucket. So far all that I have found missing was the speedometer and side covers, everything else can go. Let me know what you need and I'll track down pics of condition as needed. I have no idea what to ask for prices and honestly I'll probably let most of it go for shipping cost but if there is something worthy of a few bucks for my project fund I'd appreciate it. I'm located at 36316.

Edit: Front brake components SOLD

Pics below show most but not all of it.
user3550_pic8130_1292111790.jpg

PC190023.jpg
 
How much for the rear springs? how long are they?
shipping to Doreen, Victoria, Australia 3754
 
kilometric said:
How much for the rear springs? how long are they?
shipping to Doreen, Victoria, Australia 3754
Click to expand...

How about $20 US. Just a rough estimate from US Postal shows about $60 US for shipping. I'll have to get you an exact measurement but they should be about 13.25" to 14". I'll get that measurement tomorrow.
 
yeah cheers, sorry to be a pest but i was hoping the shipping would come in a bit cheaper, i have to get some other bits and pieces from dime city so i may as well just order a new black set rather than save $15 and have to paint these ones, thanks for the response though, its always the shipping that breaks the bank!! haha one of the very few downfalls of living downunder!
 
How much for the rotor and caliper w/brake hose. shipped to california. 93455.

Probably fit it all in a large flat rate box maybe? Or I can send a UPS label.
 
How much for the upper triple tree shipped to 08753? Also do you have the upper and/or lower rear engine mount bolts?
 
Interested in the rear brake and sprocket. How much with shipping to Seymour, CT 06483? Any more pics would be great.

As far as the fork tubes fitting a 550. I used 76 CB550 tubes on my 72 CB750 and they were the same size to fit the tree 34mm I think. The are bit shorter, by an inch or so, I'm not sure exactly but its cool for a cafe and my fender never touched the headers during travel. Look up replacement fork tubes new for both your bike and the one being parted out to find out the sizes. I usually got here to look up that kind of info: http://www.buymotorcycleparts.com/OEMpartfinder.htm They have exploded diagrams to reference and print.
 
TommyT said:
How much for the rotor and caliper w/brake hose. shipped to california. 93455.

Probably fit it all in a large flat rate box maybe? Or I can send a UPS label.
Click to expand...

Responded to your PM.
 
StrtLegal said:
How much for the upper triple tree shipped to 08753? Also do you have the upper and/or lower rear engine mount bolts?
Click to expand...

How about $30 shipped in a USPS flat rate box for the upper triple? Engine bolts I do not have. I am actually looking for some because some of mine are bent.

edit: Picture added, all the hardware is there except the stem pinch bolt.
uppertriple.jpg
 
MBS said:
Interested in the rear brake and sprocket. How much with shipping to Seymour, CT 06483? Any more pics would be great.

As far as the fork tubes fitting a 550. I used 76 CB550 tubes on my 72 CB750 and they were the same size to fit the tree 34mm I think. The are bit shorter, by an inch or so, I'm not sure exactly but its cool for a cafe and my fender never touched the headers during travel. Look up replacement fork tubes new for both your bike and the one being parted out to find out the sizes. I usually got here to look up that kind of info: http://www.buymotorcycleparts.com/OEMpartfinder.htm They have exploded diagrams to reference and print.
Click to expand...

Let me go out and weigh/measure those parts for you to get and idea for shipping. I'll grab some pics for you too, when the sun gets back up.
 
MBS said:
Interested in the rear brake and sprocket. How much with shipping to Seymour, CT 06483? Any more pics would be great.
Click to expand...

Pics below for you. Everything is dirty but appears to be in good shape. I included a close up of the sprocket, doesn't seem to be too worn down and wasn't sure if you needed the shroud as well so it is in the picture. Everything should fit in the larger UPS flat rate box, so how about $30 shipped? Send me a PM with address and we can sort out the Paypal if you are still interested.

rearsprocketdrum.jpg

drumunderside.jpg

sprocketcloseup.jpg
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom