1979 CB750 75% Complete Project Part Out. Atlanta, GA

[Bubba13]

UP FOR SALE IS A 1979 CB750 DOHC CAFE RACER BIKE (NEEDS COMPLETION). MOST WORK HAS BEEN DONE TO THE BIKE AND THERE ARE ONLY A FEW THINGS LEFT TO GET THE BIKE ON THE ROAD. BIKE CURRENTLY HAS 2004 HONDA CBR 600 FRONT FORKS AND WHEEL, 2004 HONDA CBR 600 REAR WHEEL, YAMAHA FZR FOOT PEGS, ORIGINAL 1979 DOHC MOTOR, ORIGINAL TANK, AFTERMARKET CAFE RACER SEAT, ALL FRAME MODS HAVE BEEN COMPLETED.

COMPLETED:
FRAME MODIFICATION
ENGINE PAINT
SWINGARM MODIFICATION
FOOT PEG RELOCATION (TAC WELDED FOR STAGING)
7' HEADLIGHT INSTALLED
TANK KNEE CUT-OUTS ADDED

NEED TO BE DONE:
CARBS (ADDED TO BIKE/ NO CARBS WITH THE BIKE)
EXHAUST PIPE ROUTED TO DESIRED LOCATION
REAR BRAKE CALIPER WELDED TO SWINGARM
SMALL CRACK ON UNDERSIDE OF TREE NEEDS WELDING
REAR-SET MOUNTS WELDED TO FRAME
ALL ELECTRICAL WORK (BATTERY, LIGHTS, IGNITION, STARTER, SOLENOID, ETC)
ENGINE MAY NEED REBUILDING (WILL TURN BY HAND BUT HAS NOT RUN IN 4 YRS)
FRAME NEEDS POWDER COAT
PAINT TO TANK AND SEAT
SEAT PAN/ELECTRICAL PAN WELDED TO FRAME
GAS CAP LATCH LOCK NEEDS TO BE REPLACED

PARTS:
MAC 4 INTO 1 HEADERS
DUAL CONE EXHAUST PIPES
NEW CAFE REAR SETS
NEW GRIPS AND THROTTLE
NEW FRONT BRAKE LEVER/ MASTER CYLINDER AND CLUTCH LEVER
NEW SOLENOID
NEW REG/REC
NEW TIRES (MOUNTED)
NEW OIL TEMP GAUGE
MORE NEW MISC PARTS AVAILABLE (BIG BOX)


Questions welcomed - PLEASE ASK!!

Tank and Tail have been SOLD!!

 

[mgalbanese12]

Re: 1979 CB750 75% Complete Project / Will part out. Atlanta, GA

Would you consider selling me the tank/seat? If so, do you know if the tank would fit on an 82 CB750K?

 

[ford40]

PM sent

 

[bananas]

Willing to part anything?

 

[Bubba13]

Parting the entire bike!!

 

[Jrbrownie00]

more info on the pipes? inlet size? Cone/Lossa?

 

[wickerRUG]

Are you willing to part with the MAC headers, if they're still available?