1979 CB750F dohc project

[tccook]

so i picked up this old super sport last fall and now starting to rip in to it and build it up

 

[tccook]

Sent from my iPhone using Tapatalk

 

[Tune-A-Fish]

Nice!

Is that a radial engine laying behind it?

 

[wahvtec]

Love the windjammer! I love those old vetter fairings

 

[tccook]

Yeah it's a radial engine! that was the bush I pulled it out from when I picked it up the fairing made it look huge so I junked it and it was busted up


Sent from my iPhone using Tapatalk

 

[tccook]

My progress over the last few nights !


Sent from my iPhone using Tapatalk

 

[tccook]

Possible fork swap off a 90 gsx600 katana and using the swing arm and mono shock but I might still adapt the swing arm to dual shock haven't made up my mind yet. But I like the mono looks


Sent from my iPhone using Tapatalk

 

[focusinprogress]

a Radian swingarm will be very similar to the katana arm yet set up for dual shocks if you don't want to adapt the rear

 

[hillsy]

a Radian swingarm will be very similar to the katana arm yet set up for dual shocks if you don't want to adapt the rear

You could probably buy 6 Katana rear ends for the price of 1 Radian swingarm with they way they are selling nowadays.

 

[tccook]

Well I got the katana swing arm held in with the swing arm bolt. doesn't look to bad and making mounts should be very simple.


Sent from my iPhone using Tapatalk

 

[tccook]

anyone try using nighthawk 750 carbs on there 80's cb750's?

 

[J-Rod10]

Mid 80's GSX-R carbs are a popular, inexpensive swap.

 

[tccook]

Do you happen to know where I could get a set. Cheaply


Sent from my iPhone using Tapatalk

 

[tccook]

Almost have enough bikes, 3 Hondas two suzuki's and a Yamaha


Sent from my iPhone using Tapatalk

 

[J-Rod10]

Post a want ad on the DOHC forum. Or, eBay.

 

[DohcBikes]

Did not know there was a DOHC forum

 

[J-Rod10]

Cb1100f.net

 

[DohcBikes]

I have a feeling there will be some good mechanics there

 

[J-Rod10]

There are some guys there that know those bikes inside and out. Great site for somebody working on a DOHC.

 

[tccook]

Cut the stem out of the gsx600 tree and the stem on the CB tree so I can put the CB stem in the Suzuki tree

Sent from my iPhone using Tapatalk