1980 kawasaki kz440 diaphragm and carb boots WTB

[mwm1977]

Hey all...looking for a pair of intake boots and a diaphragm for a 1980 kz440 if you have any to spare let me know...thanks!

 

[mark13018]

A local parts dealer can get you the boots for about $45.00 for the pair and the diaphragms are another story. There's a guy on eBay that makes a replacement that requires some modifications but work really well... Be prepared to spend 60-110 for those though, he only sells them on auction and they get pretty high in price very often.. The diaphragms are NLA at a dealer but the boots are still readily available... USE YOUR PART NUMBER when you call though. Get the kaw number from cmsnl or the like... Kaw numbers are usually 5 digits a dash then 4 digits for most of their parts.

 

[mwm1977]

Thanks a bunch! I'm actually watching those diaphragms on ebay that you spoke of...carb boots are cracked but not leaking...yet. Can make them work for now. I have some boots from cm400 that I think may work. Thanks again for the help!

 

[Brodie]

http://jbmindustries.com/Dimensions.html

Check that out. I was just looking for a diaphragm for a friend bike and strayed across that sight. not a OEM replacement but damn near close enough.

 

[Nebr_Rex]

KZ750/4s have Keihin cv34 carbs that use the same vacuum slides.