QDCer
New Member
1980 Moto Guzzi V50 Mk2
Brentwood, Maryland
No low balling. The prices are set.
The stock parts and the moto guzzi is a packaged deal. Clean Virginia Title.
I bought the guzzi last year. Its a project bike. I accumulated parts over the year. I have not started the bike yet. I did however check to see if the motor turns and It does. I can feel compression from the exhaust pipes as I roll the bike in gear. The gas tank needs to be cleaned out. The brake calipers needs to be overhauled. It does not have a stock seat, front fender, and stock turn signals. Im not certain of the mileage of the bike. Due to that the odometer did not come with the bike when I bought it. I have the majority of the parts. Whats needed is:
Air filters
Drive shaft boot
Clutch cable
Brake pads
Starter/kill swtich
Here is a list of Parts I accumulated over the year:
Stock Parts
1980 Moto Guzzi V50 MK2 $900.00
1981 " " Gauges Gauge Cluster $174.00
Ignition Switch $25.00
3x used brembo brake calipers $75.00
3x brembo FO5 caliper pistons $90.00
3x caliper kit $64.00
2x pair of bleed nipple $32.00
3x banjo bolts $22.00
6x caliper mount screws $16.00
Spark plug cover $4.00
AMG Power sport Battery $153.00
Battery strap $17.00
Speedo Cable $19.00
Used Dellorto VHBZ24 RH Carb $75.00
" " LH Carb $75.00
Pair intake rubbee sleeves $18.00
Total $1,759
Aftermarket Parts
5x gallon metal rescue rust remover $125.00
2x horn exhaust $10.00
Pair of handle bar grips $5.00
DCC Brat Seat $199.00
Chrome slanted cats eye
Tail light $32.00
Marker Light Aluminum(black)
(S/F) Amber $34.00
" "
(S/F) Red $34.00
Black left side handle bar
Control switch. $69.00
Brentwood, Maryland
No low balling. The prices are set.
The stock parts and the moto guzzi is a packaged deal. Clean Virginia Title.
I bought the guzzi last year. Its a project bike. I accumulated parts over the year. I have not started the bike yet. I did however check to see if the motor turns and It does. I can feel compression from the exhaust pipes as I roll the bike in gear. The gas tank needs to be cleaned out. The brake calipers needs to be overhauled. It does not have a stock seat, front fender, and stock turn signals. Im not certain of the mileage of the bike. Due to that the odometer did not come with the bike when I bought it. I have the majority of the parts. Whats needed is:
Air filters
Drive shaft boot
Clutch cable
Brake pads
Starter/kill swtich
Here is a list of Parts I accumulated over the year:
Stock Parts
1980 Moto Guzzi V50 MK2 $900.00
1981 " " Gauges Gauge Cluster $174.00
Ignition Switch $25.00
3x used brembo brake calipers $75.00
3x brembo FO5 caliper pistons $90.00
3x caliper kit $64.00
2x pair of bleed nipple $32.00
3x banjo bolts $22.00
6x caliper mount screws $16.00
Spark plug cover $4.00
AMG Power sport Battery $153.00
Battery strap $17.00
Speedo Cable $19.00
Used Dellorto VHBZ24 RH Carb $75.00
" " LH Carb $75.00
Pair intake rubbee sleeves $18.00
Total $1,759
Aftermarket Parts
5x gallon metal rescue rust remover $125.00
2x horn exhaust $10.00
Pair of handle bar grips $5.00
DCC Brat Seat $199.00
Chrome slanted cats eye
Tail light $32.00
Marker Light Aluminum(black)
(S/F) Amber $34.00
" "
(S/F) Red $34.00
Black left side handle bar
Control switch. $69.00
