***2009 - THURSDAY HANG *** Be It Wrenching in the Garage or Hanging at TIMS..

Status
Not open for further replies.
I really liked that ride too - didn't care for the ride down St. Clair.

Mississauga may be a bit of a stretch for me, unless I can catch a lift. Will be cruisin on the 49cc Vino tonight! 50-60kph is about the limit on that puppy with me on it.
 
Tim said:
I really liked that ride too - didn't care for the ride down St. Clair.

Mississauga may be a bit of a stretch for me, unless I can catch a lift. Will be cruisin on the 49cc Vino tonight! 50-60kph is about the limit on that puppy with me on it.
Click to expand...

well, i'll offer you one of my 450s, no crashy crashy though, both working, a rare event, kinda like an eclipse,
 
Ooooohhhh.... wow - tempting! Might take you up on the offer - will see how my left leg feels by tonight. Still really badly bruised and swollen.

Folks meeting up at the garage at 7PM then?
 
Re: ***2009 - THURSDAY HANG *** Be It Wrenching in the Garage or Hanging at TIMS




THURSDAY JULY 2

MEET AT GARAGE 7PM

RIDE: MYSTERY....






 
Grrr. Shooting some chick band I've never heard of at 7. Will find out where you are once I'm done...
 
Re: ***2009 - THURSDAY HANG *** Be It Wrenching in the Garage or Hanging at TIMS

hide said:
We'll have dinner at home and come out later!
Click to expand...

That's a good idea. I've been eating out too much. I'll drop by anyway and see what the plan is.
 
After moving from Brooklyn to Toronto and realizing I don't ski and it's minus-128 degrees here in December ... I picked up an old beat up honda 400 and built it out over the winter.

Where is this Tims you speak of for the meet on Thursday? You guys on for this week?

HR
 
Well, the traditional meeting place used to be the Tim Hortons at Lakeshore & Leslie. We haven't met there in a number of weeks. Keep your eyes on this thread and you should see some details for this coming Thursday. For myself I will be hooking up later in the evening - won't be getting out of the house till 9:30 or so.
 
Re: ***2009 - THURSDAY HANG *** Be It Wrenching in the Garage or Hanging at TIMS




DTT RIDE THURS July 9

Figure people are getting poor from eating out every wk (at least i am), so I think we'll have the ride a little later..
those who still wanna grabsomething to eat I'm thinking cheap, quick and delicious ROTI near uni/dundas

DINNER MEET: GARAGE 6:30

RIDE MEET: GARAGE 8pm (the ex is apparently blocked off)

then i think a ride through the beaches to ed's ice cream and other such things would be nice. anyone with a route, pls post it!









 
Re: ***2009 - THURSDAY HANG *** Be It Wrenching in the Garage or Hanging at TIMS

I'm going to check out Haugen's in Port Perry. If I get back in time I'll join the ride.
 
Re: ***2009 - THURSDAY HANG *** Be It Wrenching in the Garage or Hanging at TIMS

DrJ said:
I'm going to check out Haugen's in Port Perry. If I get back in time I'll join the ride.
Click to expand...

yeah i saw a bunch of scooters are riding out there tonight... are you actually gonna go in and eat something? 96k ride one way. sounds kinda fun!
 
i'd be up for the early gtg pending figuring out why my signals have died.

i have to be home before i turn into a pumpkin since i won't have my m2 till the 19th :-\ booooo
 
Re: ***2009 - THURSDAY HANG *** Be It Wrenching in the Garage or Hanging at TIMS

mrkil said:
i'd be up for the early gtg pending figuring out why my signals have died.

i have to be home before i turn into a pumpkin since i won't have my m2 till the 19th :-\ booooo
Click to expand...


looks like not a lot of people are going to be out til later...the dinner ride won't be much of a ride, just downtown to get food..
perhaps we meet at 8 at the garage, mr kil should be fine, it's 1/2hr after sunset anyway for m1. (sets at 9 tomorrow)
dang you're so close! (although i know lots of people riding illegally!!!)
 
Re: ***2009 - THURSDAY HANG *** Be It Wrenching in the Garage or Hanging at TIMS

FOR REALS PLAN:

MEET GARAGE 8PM

There's apparently a crazy steep and twisty rd out near rattlesnake point (1hr away) appleby line north of derry rd... perhaps we wanna check it out? if not, we can still go to rattlesnake point and drive back. we can take 401 or QEW depending on how comfortable people are.

http://maps.google.com/maps?f=d&source=s_d&saddr=Stadium+Rd,+Toronto,+ON&daddr=QEW+to:Milton,+ON+L9T+2X6,+Canada+(Rattlesnake+Point+Conservation+Area)+to:appleby+line+and+steeles+ave+w+to:Qew+(De+Toronto+%C3%80+Burl.)+Direction+Niagara+%5Bappleby+Line+-+Rue+Brant%5D+-+Construction+En+Soir%C3%A9e&hl=en&geocode=%3BFaTQlwIdgFNA-w%3BFb_ulwIdz409-yHN420c2D-R4Q%3B%3BCd8T7w09HO6_Fd7wlQId0cY--yG_zgOkMQHShw&mra=pe&mrcr=2&via=1&sll=43.402803,-79.783058&sspn=0.139186,0.308647&ie=UTF8&ll=43.513203,-79.681778&spn=0.277865,0.617294&z=11

if not this thurs, on sunday..
 
well i'm for anything from about 5 till 9 but my better half will be on her ruckus so i won't be going 60+ ;D
 
I'm working today so no Haugen's for me. Will meet up tonight, maybe bring a guest.
 
Re: ***2009 - THURSDAY HANG *** Be It Wrenching in the Garage or Hanging at TIMS

lovehertz said:
There's apparently a crazy steep and twisty rd out near rattlesnake point (1hr away) appleby line north of derry rd... perhaps we wanna check it out? if not, we can still go to rattlesnake point and drive back. we can take 401 or QEW depending on how comfortable people are.


if not this thurs, on sunday..
Click to expand...

The Locals like to Sand those corners to deter all the bikes coming around in the summer

Be safe guys
 
Status
Not open for further replies.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom