Oneorangedog
New Member
Yep, correct - the triples are made. I chose 207 centres and worked on that, thinking it would be ok - I bought USD forks with radial caliper mounts, which i knew would be close to the spokes, but thought it might just be enough - it ended up being 2mm clearance from radial caliper to spoke. I'm not that comfortable with 2mm, so looking at my options.focusinprogress said:I think the whole issue is he's already working with custom triples he had made up for a pretty penny if I'm not mistaken....
everywhere I've been able to read says the 929 was 53mm lower and then when they switched to the 954 they became 54mm.....but I've also never had a set in front of me to measure....
I have been informed that the 929 forks are 50/53 which is good for my triples. But looking at the 929 calipers [which i assume are axial mounted], they don't look any narrower than my current R1 radial calipers?
Does anyone know if the 929 calipers will give slightly more clearance?
Thanks!